creationblue's latest activity
Help Support Early Bay Forum:
-
Yes, big luxury double decker with a separate trailer for the equipment. It woke me up at 0230am when they left , and I then slept until... -
For anyone who’s interested this is what I’ll be coating the underside of the bus with. Not cheap but kills rust, prevents new rust...
-
Gabs got his new Alfonso style motor in and he resisted the urge to give it ‘A Squirt’ and he seemed to take the hills with ease. We...
-
3 days work and I’m at this stage, about 75% of the raptor is removed. Thankfully other than the jack point and small piece of the...
-
Last campout of the year tonight. I say last but it’s actually the first of the year too. Weathers mild and I though, ‘might as well’ :D
-
We use Cohline Ethanol resistant fuel lines from Advanced Fluid Solutions and they do it in 5.5mm and 7.6mm which is perfect for most...
-
I used clips like these, you'll need to measure the od of your fuel line.
-
How is it that I hear Viton mentioned quite a bit lately ? Mainly to do with stuff involved with fuel. Like Viton tipped needle valves...
-
I second the Cohline product. Here’s some good information as to why it can be trusted. Cohline 2240 Fuel Line Info. In short, it uses...
-
creationblue replied to the thread Spring Valley Bus meets Corvair.Thanks for the heads up. Viton seals are a no-no for rotating parts apparently, in the corvair world anyway, really not sure why mine...
-
creationblue reacted to andrewblackwell's post in the thread Spring Valley Bus meets Corvair with
Like.
Have in mind before putting all your effort into fitting seals that were bought years ago is that rubbers have limited recommended shelf... -
In full working and serviceable order 71 onwards disc brakes are very capable!! Unless you’re running a really big motor then just fix...
-
creationblue replied to the thread Spring Valley Bus meets Corvair.So It looks like the crank seal is leaking again on the Corvair motor, looking back I changed it in 2020, fairly easy job to replace but...
-
creationblue replied to the thread Brakes!!!!!.Cant you just give everything a clean and a paint, change the discs and pads, I would have thought if the calliper was sticking it would...
-
Bought the header from Kennedy engineering and bolted on the cat,purchased the stainless bent tubing sections and a stainless muffler...