Search results

Hey guys I need a full lock set for my bus so I can use a single key on all the doors, I don't mind having a different ignition key. Any ideas where I can pick a set up from?

Ah sound mate nice one! Yes I will have a stand off you! I'll PM you :)

hey cheers dude but I have sourced an air filter box now, however I do still need a stand to put back in!

Hey guys I am trying to return my bus back to stock but I cannot find a standard air filter box anywhere, all I can find is the elbow piece. Has anybody got one lying around? Phil

Oh yes, I wondered what that shelf was for in other photos! no mine has gone, it came with twin kadrons but they needed a serious overhaul so I decided to go stock. A beetle air filter, good idea, thanks for the advice guys I will look into the options :)

I bought a new standard carb, I want the bus to be stock it was totally unreliable the way I bought it. Where can I get a pedestal and standard air setup? I have found the plastic elbows but not sure what else I need? I'm quite happy to chuck the aftermarket filter!

Hi guys, my 1600 twinport has an aftermarket airfilter on and the breather pipe coming off the oil filler neck is just some garden hose venting down through the tinware. I am getting fumes through the heating - I have replaced the heat exchangers and piping and connections already, and have...

I am interested in the manual choke conversion for your 34pict3 carb, would you sell this separately? Where did you pick it up from?

I have contacted JK explaining my problem and asking if they have ever had any reports of faulty push rods and their reply was... "Good afternoon Phil, no, I'm sorry we haven't had any other reported problems with the Fuel Pump Push Rod, it might be worth looking at your Distributor Drive, as...

It seems odd that a supplier cannot manufacture a hardened push rod that is up to the job, it's easy to put a new one in but I'm concerned it is something to do with the brass distributor drive gear on the crank, only just started my research into it though. i have checked the other components...

Hi guys, I recently (approx. 2-3 months ago) replaced the fuel pump, pushrod and base with all new parts from JustKampers. Last night my Bay broke down, and I have taken the fuel pump off today to find that the end of the pushrod has been ground down, so the cam doesn't lift the pushrod past...

Hey guys, got an unusual problem where my rotor arm seems to slip off the driveshaft? I have checked the condition of it and it seems like new, I have now bent the small internal metal pressure spring to try and clamp it down a bit more, but I just wondered if anybody had come across this...

Yeah exactly what I thought, its been running fine since I bought it in December. I'll check in the daylight tomorrow and put my findings on here.

Oh right! I will check my ignition module, not had the bus long and all my experience so far is in minis...this could be embarrassing! I have a carb rebuild kit ready to do on the weekend, for £12.50 it's a no brainer. Cheers for your advice!

Yes pal, along with the black with from the electronic ignition. Coming off the negative side is the red wire. It runs fine but obviously I don't have the choke, I have taken the stepped adjuster off and flipped it round so it doesn't interfere but obviously I am going to need the choke with...

Hi guys, have just put a stock 34 pict carb back on my rebuilt 1600, it started and ran fine but wouldn't idle, it just died when i released the accelerator pedal. Then I realised there were no wires to the idle cut off and the choke, so I connected both up to the positive terminal on the...

Hi guys I need an EMPI single quiet pack muffler, mine is shot and I don't have the cash for a complete new system at the mo - looking to pick one up for next to nothing if anyone has one lying around? I can't find them for sale separately and my bus is way too loud! Also my bus doesn't have a...

Hey have you fitted this exhaust now? What is it like, are you pleased with it? Is it a decent quality, what sort of noise does it make? I have read through many exhaust posts but there isn't much information on this exhaust, but it's definitely one I would like to fit if I can find out more...

Now we're cookin! It seems I am missing a trick here (fuel tank, the reason I am doing it in the first place...) : 1) general engine sevice - valve clearances, plugs and ignition system 2) tinwear inspection 3) oil cooler seals 4) clean out fuel tank, check fuel lines, filters 5) refresh the...

Al-right here we go the makings of a list! 1) general engine sevice - valve clearances, plugs and ignition system 2) tinwear inspection 3) oil cooler seals