Search results

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. F

    Should a fuel regulator be plumbed after the pump ?

    Thought so but just wanted to double check everything .
  2. F

    Should a fuel regulator be plumbed after the pump ?

    I'm fitting twin carbs and have a electric pump and malpassi fuel regulator to plumb in .Should the regulator be plumbed After the pump and before the carbs ?
  3. F

    Do you connect both Webber ict's to a svda dizzy or just one

    What you blanked both carbs and dizzy vac ?
  4. F

    Do you connect both Webber ict's to a svda dizzy or just one

    Do both vaccum pipes to each carb need to be the same length and does it matter if I run two equal length pipes from carbs behind the fan housing to keep things tidy then t piece them to the dizzy .?
  5. F

    Do you connect both Webber ict's to a svda dizzy or just one

    Ok guys cheers ,although a bit gutted as I've just cut the new vacuum hose to length for one carb and blocked the other :-(( .I doubt I will have enough correct length to T peice off to connect the other . Incidentally does it matter if both vaccum pipes are different in length ?
  6. F

    Do you connect both Webber ict's to a svda dizzy or just one

    Do you know of any copper or brass elbow unions that are about 12mm ID for the breather fitting on the top of the carb filter?
  7. F

    Do you connect both Webber ict's to a svda dizzy or just one

    Is it ok to just have one pipe going from the oil breather outlet on the filler neck to the top of one carb .Or do you need to have a breather pipe to the other carb also ?
  8. F

    Do you connect both Webber ict's to a svda dizzy or just one

    I've just got a set of Webber ict's and had read somewhere that you only need to connect the left carb to the dizzy vacuum and just block the right one .Is this correct . Also what the best way to sort out the oil filler breather as i don't have any place for the pipe to go from the filler now...
  9. F

    Is it ok to use 6mm I'd R9 fuel hose ?

    I've got twin Webber ict's and 6mm unions and wanted to check its ok to use 6mm I'd fuel hose with them ?
  10. F

    FS Solex 34 pict carb Profeshonally rebuilt/overhauled

    To mikesbigbeetle ,sold pending payment ,will let you know in the morning if it goes through.
  11. F

    FS Solex 34 pict carb Profeshonally rebuilt/overhauled

    Havnt received payment/reply yet so carb is still available unless dovebluestu replies .
  12. F

    Driver and passenger seat for sale

    Are these single seats ?
  13. F

    FS Solex 34 pict carb Profeshonally rebuilt/overhauled

    I have a Solex 34 pict carb for sale . It's just had a full professional overhaul and service at a cost of £120. This is a genuine German made carb . Looking for £80 plus postage .
  14. F

    Wanted Double front bench seat for a 69 bus

    I'm after a good double front seat for my non walk through . It must be the type with the two hooks on the back that secure it to the cab divider .i currently have s very good 73 onwards double seat I would be willing to trade or sell once I have a replacement .
  15. F

    Early bay front passenger bench seat wanted

    I'm after a good condition front bench seat for the passenger side .
  16. F

    My 69 "Ex Volks Tuning" Panel , build /make over thread.

    Cheers Sam ,look forward to going on a road trip with you sometime in the future . :-)
Top