Search results

I’m just about to fit late bay axles to my 69 early bay so I can fit flat centre caps to my Fuch reps . I’ve been told by a chap in Holland who’s done the mod a few times in his shop that I only need to get my rear drums machined down on the nose by 24mm (the difference in axle length from early...

Selling a set of KDF style hub caps Made from correct 18 gauge steel Powdercoated light grey Show condition Come with removing hook . £200 Can collect from Bristol or Bristol Volks Fest or I can post .

Looking to fit new ball joints. Are lemforder meant to be the best available?

Havnt seen your bus for a while ,nice to see you still have it

I’m looking at going back to a stock front setup and so I’m after a set of ball joint trailing arms and stock 68-70 drum front spindles . Must be in good condition with no pitting on bearing contact surfaces .

I’m after a pair of good condition lower ball joint arms . Cheers Ja 🤙

I’m currently running no preload as I’ve been using air shocks plus I think they are out of balance so it needs setting up from scratch as per post

Hi guys I’ve been phoning about today to see if any of the few Bristol Vw shops could set up / dial in my rear suspension. The rear torsion rods might need inner spring tweaking as well as outer .I do have adjustable spring plates fitted to make the job easier on adjusting these . But it...

Hi ,can anyone tell me the correct torque settings for the 2 bolts and 2 nuts/ bolts that hold the rear hub carrier to the spring plates see pic Cheers

I take it it’s only one centre line style wheel

I’ve recently switched over to a MST one from Limebug. The idle pulley is now billet alloy not plastic and the bearing is changeable if needed . Only done a couple hundred miles but it’s smooth as . I think a big oversight for many that are fitted is that people don’t get everything running...

Cheers ,I spoke with Paul from Harry Harpic & sons and he said it’s more for the single circuit split systems rather than the duel circuit systems . I’ll get the disc kit and look into wether they are there or not . Cheers

Yeh the 19th ,I’m looking at heading out from Bristol mid morning.

Hi all ,just though I’d put it out there . I’m looking at travelling up to volksworld on the Friday mid morning from Bristol .It would be cool to convoy up with some fellow aircooled members ,I’ll be travelling about 65mph ,incase there’s speed demons wanting to go balls out .(happy to go a...

I recently purchased all new brakes front and back for my bus but due to a big motor swap I’ve decided to go with front discs . The kit I’m selling will include all you need to allow you to simply swap your old for the new kit . Kit consists of CSP front Drums Genuine VW powdercoated backing...

I’m thinking of fitting Dave Slacks front disc kit to my bus using the stock master cylinder. I’ve heard that if using the std MS you need to remove the non return valves . The person who owned my bus before me had Porsche 944 discs all round and was using the same master cylinder. I asked him...

Cheers

Thanks bud ,yes it was David’s kit I was thinking of but was worried about it working correctly with the stock master cylinder. Is it possible to remove the pressure valves with the master cylinder in situ