Search results

Hi, Not sure what you mean? Stock dissy now re-fitted with accuspark elecy ignition.

Ah Ok - yes can touch for a couple of seconds. Seems normal then. Leads and Plugs new last year, not driven much since.

By way of update, new coil no hesitation! However..... Purchased a Bosch 0 221 119 027 coil as it is epoxy filled (apparently oil filled do not like being mounted horizontally) and its getting quite hot. She was down on power after a good run yesterday.....but good today, coil still hot...

Thinking of this one: https://www.brickwerks.co.uk/ignition-coil-electronic-ignition-din.html £150 seems a bit steep for this one: https://www.heritagepartscentre.com/uk/043905115cus-bosch-ignition-coil-12-volt-blue-with-clamp.html?gclid=EAIaIQobChMInv707-Pu-AIVmuhRCh0ciwv_EAQYASABEgKtSfD_BwE

Well the Bosch Blue is defiantly defective! Suspected this was a fake when purchased...

Thanks both, will swap the coil today and see if that makes a difference. I’ve got a silver beru fitted and a blue bosh as a spare. She has been difficult to start but I put that down to me flooding her (if i don’t touch the accelerator she starts) Distributer: aftermarket svda with...

Happy Summer All, Got a bit of a head scratcher, she's running well in the most part but I have this very annoying intermittent hesitation. I can't seem to force it by high revs, low revs, fast / slow, hot / cold, it's random. If pushed, one hot, I would say after slowing down, second gear and...

Mike / Ozziedog - thanks very much for the advice. Esp the full vs 3/4 width Rock and Roll bed.

Well that was easy - done! That looks fantastic

Good Afternoon All, Restored my Xover 12 years now and she’s in need of a refresh, so later on this year I’m having some of the body work done. Whist the Moonraker interior is nice to look its a PITA to use. So thinking of going a bit more modern, rock and roll bed (proper rear seatbelts etc)...

.

Ok I’ll keep it in mind - rather one that needs less work Sent from my iPhone using Tapatalk

In the handle, thanks

Hi all, Been a while since I have been on here, in need of a sliding door for my 1972 crossover. Someone reversed into the side!!! Please email: [email protected] Many Thanks Andrew

Just got a set - now on their way! ;)

Hi All, Sorry to put this in general but in desparate need for 4 x 9164.2 emission tubes in time for Friday, have been advised this is the reason for my running issues! Many thanks if you can help! Eurocrat are closed! Andrew 07818204239

looks like a nice bus, badge looks a little small at the front. Not heard of a roof 'cap' before, but that roof top is different to my 72' xover. I do not have a picture but the roof looking at the top is normally in two parts with a seal... I would not fret, if your replacing the bellows that...

Aha - that may save a little time and effort, many thanks

Good evening all, Now the low light levels have hit, I have been forced to turn on my lights :( Whilst side lights are fine (dipped?), I have no main beam only high / full beam, if I tug on my stalk.......nothing happens, or rather still high beam. So something is amiss on the indicator stalk...

Beautiful