71 bay master cylinder

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

frenchi

Well-known member
Joined
Sep 27, 2013
Messages
49
Reaction score
0
can any one say where the air pipe goes from on master cylinder thanks fellers
 
hi thanks for that bus came with bits in a box it has a servo at front on shaft there is a pipe like a black concentina just wondering where it goes to as does not show it in the manual any help would be cool
 
hi thanks for that bus came with bits in a box it has a servo at front on shaft there is a pipe like a black concentina just wondering where it goes to as does not show it in the manual any help would be cool
The connection in the front bellows normally connects to a metal stub that exits through the Chassis leg into the front wheel arch, it’s to provide negative air pressure to the servo from memory, it can be left unconnected though
 
thanks for that what about other hose connection on servo where does that go also anyone have a paire of calipers im in kent
 
If you mean on the body of the servo then you need to run a pipe to your engine as you need a vacuum feed of the engine ( if it doesn’t already exist), you need to tap a manifold and install a one way valve in the line.
 

Latest posts

Top