Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Jason" data-source="post: 160655" data-attributes="member: 4174">Quite easy to work out though. Simply remove passenger seat, unbolt inner seat bracket, offer up bench seat and you'll see where to need to move the inner seat bracket to. Get a piece of suitably sized angle-iron. On the passenger side, cut the back off the angle (making a flat-bar end) so it bolts down to the holes where the bracket was originally. On the other end, you'll need to weld a flat end onto the angle so it will bolt through the holes on the side-wall of the drivers seat base (Otherwise it would foul the driver's seat toothed rack)Have a look at how it bolts down on my website and it should be fairly simple.</blockquote>