We are in the process of refitting our bay and we have decided to construct a new "kitchen" unit In which we will have a sink hob combined unit on top (Smev 8862). Underneath we will have the waste water and clean water containers. Next to it ( still in the unit) will be the propane gas bottle ( with 50mm high lip and a 20mm dia dropout vent and a retaining strap) in a small box within. Above this and close to the underside of the worktop we intend to install a PMS 3h power management system with the panel fixed from the outside but wires accessible internally. This will be within 200mm of the underside of the hob unit of the sink/ hob combo.
We have searched the web but cannot find anything that says you cannot do his - does anyone know of any rules or regulations that cover this installation. Thanks
We have searched the web but cannot find anything that says you cannot do his - does anyone know of any rules or regulations that cover this installation. Thanks
