Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Trikky2" data-source="post: 497141" data-attributes="member: 240">From memory some of the Kennedy clutches come with a ring on the diaphragm fingers so that they can fit on earlier set ups, the ones with the no guide tube and simple release thrust bearing.If using a later type release bearing, fork and guide tube, this ring needs to be removed (simple job) because the thrust ring will touch the guide tube and makes the clutch stick too far into the bell housing. The later type ball bearing release bearing works directly on the diaphragm fingers and not on the metal thrust ring.Hopefully this is the answer to your problem.</blockquote>