Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
EarlyBay Forums
Technical
Help with starting issues please :)
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Early Bay Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="67panel" data-source="post: 633759" data-attributes="member: 13328"><p>You need to check voltage at coil when cranking as well as at battery, if its below 10V then you will have weak spark. Also check choke is not coming on if sat for a bit, weak bimetal spring needing voltage to keep choke open. Full throttle worth a go on restart. Have fitted ballasted coil before now to cure this weak spark, Bosch red works well but you do need to fit a relay worked of starter to bypass to resistor.</p></blockquote><p></p>
[QUOTE="67panel, post: 633759, member: 13328"] You need to check voltage at coil when cranking as well as at battery, if its below 10V then you will have weak spark. Also check choke is not coming on if sat for a bit, weak bimetal spring needing voltage to keep choke open. Full throttle worth a go on restart. Have fitted ballasted coil before now to cure this weak spark, Bosch red works well but you do need to fit a relay worked of starter to bypass to resistor. [/QUOTE]
Verification
Post reply
EarlyBay Forums
Technical
Help with starting issues please :)
Top