boycer
Active member
- Joined
- May 31, 2016
- Messages
- 40
- Reaction score
- 0
- Location
- North Yorkshire
- Year of Your Van(s)
- 1970
- Van Type
- Westy
Hi,
I have 1970 westy with an adjustable beam & 2in dropped spindles. I recently fitted new Bilstein shocks & as they are a little (10mm max) shorter than the previous shocks I have virtually no travel left in the shocks. I have adjusted the beam, but it is at its highest ( :shock: ) which is still extremely low. I realise I could get standard spindles, but was wondering if there is anything else I could do to raise the front?
Any help much appreciated!
I have 1970 westy with an adjustable beam & 2in dropped spindles. I recently fitted new Bilstein shocks & as they are a little (10mm max) shorter than the previous shocks I have virtually no travel left in the shocks. I have adjusted the beam, but it is at its highest ( :shock: ) which is still extremely low. I realise I could get standard spindles, but was wondering if there is anything else I could do to raise the front?
Any help much appreciated!