seat removal

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lobie

Well-known member
Joined
Sep 8, 2011
Messages
1,456
Reaction score
32
Location
swadlincote derbyshire
Year of Your Van(s)
1972
Van Type
Devon
how do I remove the drivers seat in my bus pulled it forward but can't see how to get it off the runners
 
It should just slide out mate.....maybe give it a little wiggle :shock: that should do the trick!
 
Sorry to crash your thread but could you take some photos of how your seats fit in ?? My seats are missing and have done Chevy Tacoma seats fitted, I'd like to go back but don't know what I'll need other than seats lol
 
Not that it moves much but I reclined it as far as it would go which is not far which gave me enough room to get it off the runners and past the stearing wheel
 
If it's a 72 it might have the seats that have a little spring loaded tooth type thing that catches on a metal tab on the runner to stop it sliding out. It just needs pulling up to clear the metal tab, if it is that.
 
passengers side try grabbing the top and the bottom and squeezing together, then lift out from the hinge.
 
georgeyv said:
If it's a 72 it might have the seats that have a little spring loaded tooth type thing that catches on a metal tab on the runner to stop it sliding out. It just needs pulling up to clear the metal tab, if it is that.

mine is a 72 so that will be why

thanks
 

Latest posts

Top