Tracking...

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

trinketpimp

Well-known member
Joined
May 23, 2013
Messages
262
Reaction score
8
Hello, does anyone do it themselves, is it do-able and if so, any top tips? Mine has won the tyres on the inside....
 
I use two beer crates the same size and park up on a level ish bit of concrete. Put the beer crates at the rear of the front tyres and measure between the two tyre sidewalls. Move the crates and measure at the front of the front tyres . Cut a piece of wood to this rough dimension, it should be tight at the front and need a two or three mill packer for tight on the rear. There should be the slightest bit of toe in which is pigeon toed or at least not the other way round. Some car manufacturers nowadays prefer level with no toe in but older motors need a couple of degrees.

Ozziedog,,,,,,,,,or pieces of string !!! :)
 

Latest posts

Top