Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="matty74" data-source="post: 644561" data-attributes="member: 21991">Yes, this was after a (cold ish) start up, the engine had been running for a bit as the temp needle is off its stop position <img class="smilie smilie--emoji" loading="lazy" alt="👍" title="👍" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png" /> The sender is paired with the gauge, so suspect it’s fairly accurate.I got the t piece from demon tweeks as the male thread matches the case thread, I also used a few 10mm dowty washers to ensure I didn’t overtighten and to get outlet orientation for sender in a suitable location.[ATTACH=full]8506[/ATTACH]</blockquote>