• If you have bought, sold or gained information from our Classifieds, please donate to Early Bay and give back.

    You can become a Supporting Member or just click here to donate.

WANTED: Radio bracket

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Coda

Well-known member
Joined
May 25, 2020
Messages
403
Reaction score
60
Location
Tewkesbury
PO used two massive joined together jubilee clips to secure the radio to the dash, but it's not very secure (there's nothing holding the back of the radio to stop it sagging), hence I'm looking for a bracket or bar, whatever was used for this task. I can't find any mention of it on the usual microfiche parts sites so I don't know what it looks like. The only thing I can find is this for the Beetle: https://www.classiccult.com/vw-bug-radio-rear-bracket.html (fiche: https://www.classiccult.com/pub/media/catalog/product/cache/7304c1b2f8590ca4923789938c796f07/v/w/vw-bug-radio-rear-bracket-5.jpg) and these apparently for the splittie: https://www.ebay.com/itm/231819644050 & https://www.ebay.com/itm/291653700470.
Failing that it shouldn't be hard to make one if I know what the original is supposed to look like. Does anyone have one they are willing to part with, or even just a photo/measurements?
Thanks.
 
PO used two massive joined together jubilee clips to secure the radio to the dash, but it's not very secure (there's nothing holding the back of the radio to stop it sagging), hence I'm looking for a bracket or bar, whatever was used for this task. I can't find any mention of it on the usual microfiche parts sites so I don't know what it looks like. The only thing I can find is this for the Beetle: https://www.classiccult.com/vw-bug-radio-rear-bracket.html (fiche: https://www.classiccult.com/pub/med...38c796f07/v/w/vw-bug-radio-rear-bracket-5.jpg) and these apparently for the splittie: https://www.ebay.com/itm/231819644050 & https://www.ebay.com/itm/291653700470.
Failing that it shouldn't be hard to make one if I know what the original is supposed to look like. Does anyone have one they are willing to part with, or even just a photo/measurements?
Thanks.

The Javelin 9044 multi-band (FM-VHF, SHORT, medium & long wave) mono radio installed in my family's 1973 VW Type 2 in August 1975, was solely held in place by the facia-plate and the large nuts on the volume & frequency control spindle's threaded sleeves.

https://www.thesamba.com/vw/forum/album_page.php?pic_id=328338
328338.jpg
 
Last edited:
Thanks for the info. The early dash is slightly different and more curved than the '73.

In the 16 months since I requested info, I found out the there is supposed to be a radio 'stay' bracket that connects the bolt at the back of the radio (which you can see in your picture #4) to the firewall possibly via another embedded bolt or more likely a metal tapping screw.

In the end I just put the jubilee clips back around the radio. It seems secure enough.
 

Latest posts

Top