Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Stuartk

Stuartk

Supporting Member
Well-known member From Southwater , West Sussex
Joined
Last seen
Messages
95
Reaction score
40

Latest activity Postings About

    • Stuartk
      Stuartk replied to the thread Cab door window glass referb - Now window wont lower.
      Check the glass in the runner on its own to rule out winder mechanism alignment. I found that problem
    • Stuartk
      Stuartk replied to the thread No thermostat and no vents flaps.
      Well if it helps ive just moved the flaps from the original dog house to a round one .
    • Stuartk
      Stuartk replied to the thread Cab door window glass referb - Now window wont lower.
      Found a few more door rebuild photos. After market parts are basically poor quality. Not cheap just poor fitting .
      • IMG-20240428-WA0013.jpeg
      • IMG-20240428-WA0011.jpeg
      • IMG-20240428-WA0009.jpeg
      • IMG-20240428-WA0007.jpeg
      • IMG-20240428-WA0005.jpeg
      • IMG-20240413-WA0002.jpeg
      • IMG-20240413-WA0000.jpeg
      • 20240409_182120.jpg
      • IMG-20240409-WA0007.jpeg
      • IMG-20240409-WA0003.jpeg
      • IMG-20240409-WA0005.jpeg
      • IMG-20240408-WA0006.jpeg
      • IMG-20240407-WA0009.jpeg
      • IMG-20240407-WA0001.jpeg
      • IMG-20240406-WA0005.jpeg
      • IMG-20240401-WA0007.jpeg
      • IMG-20240401-WA0005.jpeg
      • IMG-20240401-WA0003.jpeg
    • Stuartk
      Stuartk replied to the thread No thermostat and no vents flaps.
      Having trouble getting the thermostat rod between the cylinders on my 1776cc . The lower air shielding is in the way. Not sure how to...
    • Stuartk
      Stuartk replied to the thread Throttle linkage.
      Looking good !!
    • Stuartk
      Stuartk reacted to K@rlos's post in the thread Throttle linkage with Like Like.
      Both sorts of CSP linkages are almost impossible to beat, like all German engineering they are beautifully made. Bellcrank style on...
    • Stuartk
      Stuartk reacted to ozziedog's post in the thread Sherbie with Like Like.
      In all the time I’ve had this van, and it must be somewhere over a decade but not one and a half, in all that time Mrs Ozziedog has been...
    • Stuartk
      Stuartk replied to the thread Sherbie.
      Absolutely loved the van story . Mrs k is almost as understanding as Mrs Ozziedog......
    • Stuartk
      Stuartk replied to the thread Sherbie.
      I had that issue with my new wiper motor!!! Wiredin a relay to give me the park facility
    • Stuartk
      Stuartk replied to the thread Throttle linkage.
      Looking like a neat job 👌 The CSP linkage is tidy .
      • 20250218_085704.jpg
      • 20250218_085649.jpg
    • Stuartk
      Stuartk replied to the thread No thermostat and no vents flaps.
      The wax stat.👍 Test fit of the flap assembly
      • 20250218_085235.jpg
      • 20250218_085432.jpg
    • Stuartk
      Stuartk replied to the thread Throttle linkage.
      Top man. CSP bell crank are the best. I tried two different bar versions but they had a habit of suffering heat changes so setting the...
    • Stuartk
      Stuartk replied to the thread No thermostat and no vents flaps.
      Hi guys I'm just fitting the flaps etc to mine as I've been running with out them for a couple years on my 1776cc. The engine never...
    • Stuartk
      Stuartk replied to the thread Devon pop-top.
      I fitted new springs from JK and a new seal kit plus a general push on seal under the fibre glass surround. New hard wood frame made to...
    • Stuartk
      Stuartk replied to the thread Devon pop-top.
      The original frame fell apart under the weight of the new ali sheet so I had to make a new one. You must use blind rivets and a lot of...
      • 20210531_135738.jpg
      • IMG-20210531-WA0004.jpeg
      • 20210531_135734.jpg
      • IMG-20210531-WA0006.jpeg
      • 20210530_155523.jpg
      • IMG-20210531-WA0002.jpeg
      • IMG-20210529-WA0003.jpeg
      • IMG-20210529-WA0001.jpeg
      • 20210530_155514.jpg
    Show older items
  • Loading…
  • Loading…
Top