Recent content by boyzie

Hi David Would you be ok to post ? I only need the Frame. Thanks Dave

Hi all Wanted RHD drivers seat, frame needs to be in solid working condition

Hi All Looking to get the SC Seats and door cards retrimmed , so any recommendations for Interior Trimmers , based in Herts so someone not too far Thanks

Hi All Long shot but anyone have or know of a solid Early bay Single cab treasure chest door for sale? Thanks

Hi All Tried Looking for a past blog covering this but can't find anything . So Have a US Spec 69 SC which has had the indicators converted to UK spec , indicators work fine but the hazards don't so I'm guessing its a switch or wiring issue. So indicator lights (conversion)have had a...

Hi All Have a early link + pin beam setup on the SC and have noticed that the idler Pin has noticeable movement , was thinking of doing it myself but need a reamer and drive for the bushes , can anyone point me in the direction of the Tools or recommend someone to do the whole job , based in...

Hi All Anyone on here know who does King pin refurbs? Cheers

Hi All Emailed CSP and they have confirmed that the Adapters are faulty , they are sending another pair out, Thanks sparkywig for your suggestion.

Hi All Anybody on here have CSP brake conversion fitted , if so any issues?? I've a re-occurring intermittent brake binding issue , have tried to fit the csp conversion adapters (recommended ,required to stop binding) on the MC but these dont seal the copper line when brake fitting fully...

110 cam twin dell DRLA 40's , planning a tune and RR session

Hi All Probably going over old ground but took the plunge and bought a 123 dizzy for my 2110. Any feedback from users of the 123 dizzy in terms of curve to run and initial setup? Cheers

Update,,, Sorted , able to remove the brake lever using brute force , loads of heat & getting inventive with wooden blocks , will be reassembling with plenty of copper grease, to avoid future issues. Cheers

Thanks fellar , have seen this already and the top right-hand diagram does almost resemble the assembly on my SC , but as I mentioned originally theirs only 1 main shaft that the brake and clutch pivot on , so last night took the clucth end off and this has revealed a woodruff type key to lock...

Hi All so finally diagnosed my brake binding problem , seems the brake return spring is broken , so looked at the bentley manual and whats pictured is completely different from what I'm faced with, bentley shows separate shaft for clutch and brake I've only one.. Has anyone on here had the...

Think I may of found the culprit... Brake line feeding the fronts from the MC has a kink/dodgy bend , which may be causing the pressure to not be relived after the brakes have been applied and therefore heat is generated which makes the issue worse causing the fluid to expand , so in the...