CSP solid disk conversion

[boyzie]

Hi All

Anybody on here have CSP brake conversion fitted , if so any issues??
I've a re-occurring intermittent brake binding issue , have tried to fit the csp conversion adapters (recommended ,required to stop binding) on the MC but these dont seal the copper line when brake fitting fully tightened in the MC adapter , using standard MC.


As always any help appreciated
Cheers

 

[K@rlos]

Adjust the push rod that goes into the master cylinder

 

[sparkywig]

I haven't used the conversion adaptors, you just need to break off the original pressure retaining ball and springs from the master cylinder ports that have the disc brake circuits connected.

 

[boyzie]

Hi All

Emailed CSP and they have confirmed that the Adapters are faulty , they are sending another pair out, Thanks sparkywig for your suggestion.