Recent content by mr fish

I've got a pair of 72 crossover seats in my 71 earlybay. The covers and shape of the seats are slightly different but all the fixings are the same and there completely interchangeable. Mines a walk through by the way.

SOLD

I'll include UK shipping for £70.

Pair of CSP adjusters for bay beam, brand new never fitted - £70 Brought these to fit into my bay beam but ended up buying a beam with the adjusters already fitted. Located in Rochester Kent or can post at cost.

Could you send me a pic/details of the shocks? Are they the white ones for a lowered bus?

Thanks for the link Alex. I have already found a spare bolt elsewhere.

Hi Just fitting a lower beam onto my bus and have noticed one of the grub screws which bolts through the adjuster and into the beam is damaged. Does anyone have a spare laying about or know where I could by a replacement as I don't really want to buy a complete new adjuster. Have looked at...

I got mine from the company below http://www.lightec-autostyle.co.uk/ready-leds-push-c-8_40.html" onclick="window.open(this.href);return false; It made a huge difference, before i couldn't read the speedo or fuel gauge at all after dark. I do have to say the old bulbs were very black so new...

Headliner looks great. Are the joins in line with the roof strengthing ribs? My original template has a smaller section in the middle meaning that the join is in mid air but think it might be easier to make join in line with the rib so I can screw the joiner into them if I need to? The original...

Looking good :-) You going to bring it to 'Grill n Chill' ?

small flange will be fine for any stock engine. in fact you'll fine it quite hard to buy a large flange system these days unless its a fully merged system.

I fixed one with an m10-m14 case saver.

oh what a pain in the arse, a bit of searching on the samba reveals that the longer dynamo is a high output 38A units only used on T2 from 71-73. but it need special backing plate, pulley and regular.

Hi I've just swopped the dynamo on a recently built engine as the original wasn't working, but the new dynamo appears to be too long and the belt doesn't line up. If i measure its 10mm longer than the old one! Any ideas? i'm not aware of 2 different pulleys to match different dynamos! the one...

009 don't work very well because they rely on revs to bring in the advance but advance is need to get to that point in the rev range and hence the flat spot. With a SVDA dissy the vacuum produces advance before the revs increase so the revs increase a lot quicker and more smooothly. It is a...