Search results

this is my problem abit i havent got a notch out where tdc is on my dizzy but if the dizzy caps on at tdc it the rotor arm would be pointing where the lead off spark plug no1 would be is that correct? im just compairing it againt my bottom pully as that has got the degress on it and tdc and bdc...

ive checked my valve clearences as i have a starting issue and now it wont fire up and when i turn the engine over with a spanner i can hear a massive gush of air come out wen i turn it over have i set them completely right? is there any 1 in the midlands that i could borrow for a hr or so just...

I've got my mate comin Sunday to check the timing again And I'll remove the coil lead tonite and turn it over too see if its still struggling

i havent got a condensor on my distributor cos ive got electronic ignion any thing else any 1 can think???? :?: :?: :?:

ive got a 1641cc with twin carbs with electronic ignition i had a running problem where it seemed to lose power then it would come back and prob back fire every so often, i pulled the engine out and checked all this lot, i changed all the fuel lines and check the fuel pump and changed the fuel...

hi mate how many gear box mounts are there on the van is there only 1? and theres 2 engine mounts aint there :?

think it mite have been me bein tired :lol:

I was just sat back from my van thinking wat else to do to try and get my running problem sorted out and was looking at the engine and it seems to be lower on the right hand side only about a 1/2 inch to a inch is this normal or is there some thing wrong :cry: Thanks sam

Hello got a few running problems and just need to get this thought out my head how do I test my coil?

So it will change engine note if theres a leak do I spray it on the inlet then spray exhaust to see if that's leakin? Thanks sam

I'm running dellorto DRLA 40s I'm gonna check all the inlet gaskets next and then I need to check the exhaust gaskets how do I do this? If I find a leak I'm gonna rebuild them so I'll check the jets then, I've checked the fuel pressure and changed the pump and I have put new fuel line and...

Ok mate I'll try this next i no how to test the carb by spraying WD40 from the carb to manifold But how do I test the exhaust ? :) Thanks for ur help and time sam

It's popping and banging though the exhaust and every so often pops through the carb I've check nearly everything I can think of to see if it's lean or not how do u think I could check it Thanks sam :)

Ok mate I'll have to try that when I get home hopefully that will be it Thanks Sam :D

and is it a ballast iginiton or not im getting so :? or how can i tell wats on mine thanks again

ill try my best german voice :lol: will it make any difference that im running electronic ignition? mines a blue bosch at the min :? thanks for ur help and ur time real appreciate it thanks sam :)

i thought it was the coil a few weeks ago but some 1 on here said it wouldnt be, but i think its worth a go i dont no where i can borrow from to be honest ive seen a few lucas 1s for sale but no sure if there any good, whichs 1s are good to buy if it comes to that? :cry:

thats my next plan of action to check the valve clearances, (i dint think that would make that much of a problem but im gonna check it asap) well i checked my carbs today and 1 has worked it way lose as it was a half a turn to tighten so did that up, and i can hear the air getting suck in, im...

ive been havin this on goin prob for a few months now and struggling to gert to the bottom of it and if i cant find it soon its goin to some 1 to be sorted but cant really afford there price its a 1641cc with twin carbs with electronic ignition ive changed the fuel system (pump reg lines and...

ive just been talkin to some 1 and they said its got something to do with my coil and wat he said its making me pull my thought to that way what would u guy think to that idea