Search results

At that current height I measured some gaps. the distance between my front tyres and my arches is 70mm and the distance from the drive shafts to the chassis rails is 35mm. the 35mm is a bit worrying! hardly enough clearance when I go over a bump

Thanks Moseley. Apologies for the late reply. been dealing with some issues caused by the "professional" I got to weld and paint the bus. sliding door and tailgate need to be re-done. Here's a photo of the current ride height. I'd go lower if I could get away with it but not sure if I would.

wow. 1. I never got any notification of replies to that thread. 2. I completely forgot I posted it!! Sincere Apologies

Hi, Would anyone with a weedeater 2 beam know how low you can go without tubbing before the wheel arches rub? I've a gap of about 2.5" from the tyre to the wheel arch on the front. The van isn't on the road yet and I need to measure the distance between shock mounts before Creative Engineering...

anyone??

Hi all. Does anyone know how low I can get my bus and what tyre profile is best to get there without bottoming out? Weedeater 2 with 2.5" drop spindles. On its current tyres I measured the stock height to the wheel arch. 31.5" off the ground. I've dropped it to 26.5" but I'll be changing the...

What about those heater tubes?

are those bay window heater tubes for the heat exchangers in the top photo? I'm also interested in the rear bumper if @davydomes doesn't go for it.

looks like this thread is still going strong. would you have front tinware for a late bay running a standard 1600cc engine?

Hey folks. This is a sliding door from a RHD, early bay, panel van walk through. It will need repairing to the lower inner and outer sections and has some small dents. Rollers included. handles will need freeing up and I've no key for it. £150 and buyer collects. Niall.

oh wait just saw a vw heritage banner ad that said use promo code earlybay. ask and ye shall receive :lol:

I didn't know that :shock: how do we go about claiming that?

thanks for the info Alex

thanks very much Alex. no I'm cheating and fitting the early front on a late bay. do you think the late inner valance will be ok to leave on?

Hi all, I have this kit Do i need something extra in there to fit my indicators? I've seen images where there is some sort of bracket behind the slots but mine or just slots

thanks. the inner valance for early and lates are different. just dunno if I'll need to change to get it to fit. I have the lower light conversion panels.

Anyone?

Hi folks, I've got a late bay panel van but seeing as the front panel is being replaced I want to give it the early bay front end and give it a crossover look. My question is this: When I take off the front bumper deformation panel and am left with the inner valance, will the late bay valance...

Hi all, I've posted on the late bay forum too. Has anyone got one in good condition? thanks, Niall.