Search results

There's one of those bolts on each wheel tub with a washer either side of the arch, then i screwed through into the floor with some self drilling screws using the holes provided. I can pull on the seat and the frame doesn't budge, it was very important to me that it was solid as my son will be...

Couldn't find any 15" streels any where, but may not of been looking in the right places. Did it fit? Did it F**k, basically creative dont tell you that you have buy alot of other bits to make it fit, it's not a simple bolt in job i ended up buying some steel tube, longer bolts/washers/nuts...

Not updated this for ages, not alot to show really but we're getting there. Still need to finish headliner(thanks to Grazy for the templates), gonna have to sort out some interior panels but may have to be a home brew job for now and get some seatbelts in the back! A few interior pics-...

Panel wise its prob' an easy fix but the AA chap who recovered it seemed to think that it had wiped out the air con and theres power steering fluid every where so i guess thats fecked too, it is indeed an ST Lard and a cracking little car it's just funny how you never feel the same about a car...

Pissed off as it's not gonna go in my favour, hit another vehicle on a roundabout who just stopped with no sign of brake lights straddeling two lanes. When asked in a not so polite way what they were doing the passenger replied the car just cut out showing some sort of warning light on the dash...

Sorry not Early Bay related but as you can see from the pics i had a minor bump yesterday, absolutely gutted to see our daily in such a state. :cry: :cry: :cry: On the upside means i get to drive the bus a bit more. Seb

Now SOLD

Sorry you can't get to pick them, i'm new to the scene and not really in to the shows yet.

Sorry, wont be going to the show, you'll have to collect them i'm afraid, P.M if you definately want these. Seb

Cheers, i'm currently running a standard beam but it's only on adjusters so can't go too low, just out of interest what tyres you running? do you get any probs with the rears fouling the arch?

For Sale Aluminium trim for ply headliner, consists of 3xlenghts 'J' profile @ 2.5m and 1xlength 'H' profile @ 4m. This was bought from Gooding Aluminium so is not original and is enough to do a full tintop headliner, basically had to buy enough to do 2 as they have a minimum order. £50...

Absolutely amazing bus, was just wondering what offset your wheels are as i'm looking at getting a set but the guys saying the offset is +15mm which sounds a little low, cheers Seb.

Loving this bus, as always! Spotted it at volksworld and its looking good fella, is this the chap in the forest of dean that did the work? Will be defo getting his details for the near future. Seb

Graham PM sent. :) Seb

Have a look on here http://www.goodingalum.com/p9/prod63/Pr was kindly given this link by egotrippin off here i havent ordered any yet as there's a £100 minimum order, maybe if theres enough interest and someones willing to sort it out we could do a group buy?? Seb

Thats exactly what i had to do to make mine fit, cheers for the heads up on the foam looks like i might be calling on the skills of the t2d trimmer looks good. Seb

Des, i have the recomended 18mm of flooring, maybe just me but even on that depth of floor for the seat to convert to a bed the mounting point on mine was still over an inch away from the wheel tub and the bolts supplied to fix it here were only 30mm long so had to get longer ones, as i've said...

Sorry guys havent got any pics yet as the van is twenty mins drive away so will try and get some tomorrow night. I can only comment from my experience from fitting the seat and dealings with C.E, i'm not a massively technical person but like to think that stuff like this isn't beyond me. When...

Mine is the mesh type tottaly baffled as different to instructions and web site! I ended up using some steel tube from B+Q as a spacer between bed and wheel tub with washers on either end needed to get some longer M12 bolts too :roll: . They really need to sort this out imo as they make out it...

Just fitted a seat bed, its a good bed but was a right pain fitting the thing! Instructions are shit regards fitting and got no help from C.E absolutely wern't interseted and said they'd call me back never heard a thing, that said it's solid now it's in thinking of getting the buddy seat too.