Search results

Hello all, I know the question has been asked before, but I was hoping that someone knows of a tyre shop in East Herts / North Essex that can balance wide 5 wheels. I tried a few places locally to me in Stortford but no joy. Most can only do wheels with round holes in the middle. One place...

The 4-pin flasher relay I needed for my 1970 van indicators was missing and because of the broken mess of my fusebox and other missing one-year-only difficulties, I changed it to 1973-on, so the original relay wouldn't physically fit. No worries, I thought; I have a 4-pin flasher relay for a...

Just been through this myself on my 1970 devon. My PO was evidently unaware of the magic of electricity and had given up leaving the whole loom looking like magpies had nested in it. Anyway, the horn. An ignition-live feed from the fusebox runs under the floor to the horn (+ terminal). The...

Seen on eBay: http://www.ebay.co.uk/itm/181185501207 Anyone looking for a Devon popup roof or parts ?

Sorted my horn wiring. Hot side of horn was good. Ground-side wire was flapping loose near the steering box. Horn worked when it was grounded. Started here with the brown wire that should be earth, but wasn't Replaced the wire that runs up the steering column rod from the ground connection...

I took the bulbs out of mine to test with a meter. I needed a few new ones, but they were very cheap at Farnell online. (https://uk.farnell.com/jsp/search/productdetail.jsp?SKU=1139315) I also gave the metal a rub with emery cloth before reassembly. (Sorry the picture's not so good) Cheers, Rob

My (project) bus still hasn't turned the corner. In doing the things on the to-do list I still find it getting longer, not shorter. My first goal being MOT, to get it useable and easily movable. One easy job (I thought) would be to reattach the indicator switch that was hanging off the column...

My 1970 bus is missing relays and the fueses / wiring is a mess. I can sort the wiring, but I would like to replace the relays with ones that fit the fusebox, rather than mount different ones elsewhere. I have found DNI 0127 and some Hella equivalent numbers, but they are equivalent to...

The lock in the sliding door handle (of my recently acquired project) wouldn't turn with the key, so I couldn't lock it. (It was so bad I thought it was the wrong key) So I removed the inner door handle to release the outer door handle and compared the lock number with the one on the tailgate...

I don't have any plusgas, or anything else to try. Not much patience either. So I put the key in the lock and held the key tab in a vice, then brute-forced it by pushing and pulling the handle. Eventually it gave way, fortunately without breaking anything. The lock is so crudded-up inside...

Hello all, Recently acquired 1970 Devon project. I would like to be able to lock it. One key fits all locks, but sliding door lock is stuck in the unlocked position. I've got the handle off and the grub screw out, but cannot remove / turn / loosen the barrel. I checked the key number on this...