Search results

Thanks I'll bear that in mind. I was thinking that the 30 years of technical development between the two types of ignition would ensure greater reliability from the pertronix? Regards, Si.

Morning guys, just after a bit of advise with electronic ignition. I have a bosche distributor from a T25 2.1 that had the factory fitted electronic ignition fitted, I don't have the rest of the bits or loom so the plan was to fit a pertronix upgrade. The numbers on the dizzy are; 0237 022 053...

Hi Mags, I hope all is still going well. I removed the plug from mine a few years ago, just split the outer sheath from the wires, and follow them back to which ever circuit they come from. From memory I think all but 2 can be completely removed and the others a simple re-route or re-connect...

Hi tracktony, can you PM me the details please? Regards, Si

Hi, PM 'the gate keeper'. He's got the lot! Regards, Si

Hi Frank, Any luck getting hold of your mate? Regards, Si

Thanks Guys any help is most welcome. Regards, Si

Morning guys, after a set of NSU 14" Alloys. Anything considered also singles etc. Any links you spot whilst browsing also appreciated. Many thanks. Regards, Si

Hi Aspro, second dibs please, can collect asap. Regards, Si

Thanks Paul. Regards, Si

Morning Guys, I'm on the hunt for a good twin port head. Must be in useable condition, cheap and posted to me in Notts. Any help greatly appreciated. A bare head would be fine. WHY Regards, Si

Hi Paul, Thanks for the offer but I'll see if I can get a cheap used head first. Regards, Si

Hi Paul, Thanks for the reply. I've not taken the head off yet to check for any other damage so am hoping this is the only problem I have with it. It's a standard 1.6 T1 inlet valve. What would cause this to happen in the first place? Regards, Si

Morning Guys, I was adjusting the tappets the other day - 1 and 2 cylinders ok, but when I got to number 3 I saw that the valve guide was moving up and down with the valve! I realise this will need replacing but would it need an oversized guide or is it a more common problem which just requires...

Hi Curly, I'm looking for the flaps/linkage for the fan shroud if you have any bits? Would need them posted to Nottingham though. Regards, Si

Hey Mark, mine was worse! Save your money, measure the chassis parts you need and go to the local steel stock holders and get them to fold it up in 3mm sheet. It would about £30, you get a better deal if you take a box of teabags with you! :lol: Regards, Si

Morning Guys, I took the fan shroud off the other day to paint and appear to be missing the flaps and linkage. So looking for all or part of what's should be there. Thanks for looking. Regards, Si

Hi trotter, try sending vwed a PM, he has had fuel caps in the past. Regards, Si

Hi Mark, Thanks for posting the pics of the original glovebox, very useful as it's not as complicated as the plastic one. Any chance you could put up some (any) measurements please? Regards, Si

Hi Mark, Thanks for the reply. I'm really after an old plastic one to copy as I understood they were an odd shape, so the measurements were to give me an idea of materiel requirements before I start. The top of my dash is out, as is all the ventilation stuff, wiper mech, radio and some wiring...