Search results

are you planning to install this below or on the rails?

I don't know if this is the cause but worth replacing to find out or contact VWJIM and ask him https://www.alanhschofield.com/ourparts/prod_3034812-Brake-Servo-One-Way-Valve-6879-191611933.html

They are worth keeping. It'll cost you a fortune to replace for something new. I've got a 2 way I picked up years ago and it's great.

I replaced mine with a Brazilian and all I did was make a new bracket and weld it on.

Trailer queen resto's or try Matt ball's are your best bet. They are really a stock item people keep.

Im after a 5x130 JBW cosmic ET45, they changed the offset so can buy new. Cheers Darius

Cheers, i'll email Adrian

What does the vehicle pass look like? I have a 3 page email and a photo of the site but no pass.

Contact them first and explain the noise, if you local take to them.

Who built the gearbox? If it's at all speeds could be that. My old box whined as soon as I pulled away.

It's a repro from heritage I don't mind naming them. Pointless complaining as they just give the ******** excuse that's its an electrical item and they don't take returns on these. Cheers sparky this just half the problem the bus is doing 16mpg so even if I can see it on the gauge it won't be...

Hi All need an answer on my gauge. I fitted a new sender and new gauge sometime ago and as the bus is working I have ventured out of East Sussex a few time now! The problem is when full it reads 3/4 so when it read empty I have approx. 1/2. I know this from my trips to Ninove, I have simply...

Karl Contact Mycha, I think he has oldspeed kit.

Diluted traffic film removed and a brush brings them up very well. mix 50/50 and then wipe over with warm soapy water.

Cheers Pete but I've got broad shoulders and a fat gut so neither will fit me!! I'll just get a ticket for 1 from the link.

I only need one but I'll see if I can't shift the other. How much?

I can fill that space clem. I'll have to sort the ticket out.

i replaced mine when i got the bus with some cheap one form M7, The threads are too short as mentioned above. they also when loose so when going fast!! above 40mph they would show me the road rather than whats behind me. I've now got to genuine ones i picked up from shows for £10 each.

With a 71 you can redrill your hubs and drums to 5x130pcd and they should fit. Find a machinist with a pillar drill with turntable and they should do it for less than £50 Hub caps won't fit though but a machinist can trim 20-25mm off the snout of the drive shafts and then the will. Fuchs are...

Mmm not sure why the photos are wonky.