Porsche seats
MX5
Smart seats
I've seen all these install successfully
Or just replace broken springs / buy new padding and recover the original ones -I did
I'd also add that this is a 1 person operation, you need 2 hands and a knee as you need to take out some of the natural spring in the frames to have sufficient slack to manipulate the cover when hooking them.
And top tip for getting seat back covers over frame, hand up on the front of seat...
Solved. For drivers seat, the smaller metal bar goes on the front of the back rest and is attached to the metal tangs/spikes first with the log bar going on the back of the seal back cover and over the top then just bend tangs over.
Evening all,
Back on here after a few years break, still have the bus and will be getting up and running again, at the moment the first thing on the list is seat covers and there has been a 7 year gap between stripping and refurbing the seal frames and now.
I have 2 drivers seats, stripped...
Used the late frame with some minor mods. There is no change to my fuel tank as I remember a guy in Europe did the same but without the mods and he then couldn’t get a stock tank in
Stefan,
I know of a split bus that has had this conversion done and I believe there is a load of info on SSVC forum, it took a pit of time to sort out and IIRC the tie rods needed to be modified in length
If I remember correctly, the 091 bellhousing is longer than 002 (and input shaft to suit). Also, is this an original 6 rib or a hybrid T25/T2 box as these are longer again
Guys,
Clearing out the garage to make way for my van, most items bought new by me, so one careful owner since new. Collection from Leatherhead in Surrey (J9/M25)
PM an Email or post replay with your Email if you would like pictures (and please let me know which items).
Bits for the garage or...
Collect from Leatherhead J9/M25. I am 15min from the VOWO show. If you have questions then please call 07715 623 564
If you want a picture, please PM with what you need and an Email
I WILL UPDATE AD MONDAY 19 MARCH
FRONT END MECHANICAL
NOS T2 Split K+L 64> spindles for disc brakes (K+L as...
Mike, LHD and RHD racks ought to work on both LHD & RHD vehicles -if it steers the wrong way the rack is in the wrong place and the respective LHD or RHD pitman arm needed on the beam.
I've seen all 4 variants working and everyone seems to do it a little differently.
I have 12 cab seat base springs (the coils that run down the side of the base, 4 per side) as well as 3 of the 'Z' springs that run front to back (4 per seat), there is also a box with clips in. All items genuine Vw (used), salvaged from seats I have stripped over the years when re-building...
I have 2 sets of these, caliper adaptor kits are available from £140 so making this an inexpensive brake conversion and those Porcche wheels fit right on.
Set 1 (the better ones)
Good used 944 (early) front brake set up, calipers are ATE and are free (not seized)
Hubs have been blasted and...
Optionals I know of that have been done a do work
Rascal rack -single sided just as the CE one
Astra rack, more work, only seen used on a splitter
Power steering is an easy add, the t25 boys been doing it for years using corsa columns