A few more jobs ticked off.
Teddy welded an AN-8 bung on the oil filler/breather, so that's now fitted.
[ATTACH=full]9173[/ATTACH]
Number plate light needs replacing, but the repro ones are poor quality and don't fit well,
[ATTACH=full]9174[/ATTACH]
so I found a lens in a box, gave my original one a clean up and reassembled it.
[ATTACH=full]9175[/ATTACH]
Number plates on
[ATTACH=full]9176[/ATTACH]
[ATTACH=full]9177[/ATTACH]
[ATTACH=full]9178[/ATTACH]
Didn't like the silver bolts, so gave them a bit of black paint.
Washer bottle all connected, so tried that.
Well, when I say all connected I obviously didn't mean the washer pipes....
[ATTACH=full]9179[/ATTACH]
Oh well, and the three nozzle jets look impressive but only reach the bottom of the screen. Back to the original single jet ones then.
Seat belts
[ATTACH=full]9180[/ATTACH]
[ATTACH=full]9181[/ATTACH]
A bit of carpet as a temporary measure until I decide what's going in permanently.
[ATTACH=full]9182[/ATTACH]
And Jono at Vintage Valley came up trumps with the last piece of trim.
[ATTACH=full]9183[/ATTACH]
