Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
EarlyBay Forums
Technical
Gas bottle, sink, gas hob and electric switchgear in Cabinet
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Early Bay Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Saercoed" data-source="post: 411946" data-attributes="member: 18866"><p>We are in the process of refitting our bay and we have decided to construct a new "kitchen" unit In which we will have a sink hob combined unit on top (Smev 8862). Underneath we will have the waste water and clean water containers. Next to it ( still in the unit) will be the propane gas bottle ( with 50mm high lip and a 20mm dia dropout vent and a retaining strap) in a small box within. Above this and close to the underside of the worktop we intend to install a PMS 3h power management system with the panel fixed from the outside but wires accessible internally. This will be within 200mm of the underside of the hob unit of the sink/ hob combo.</p><p>We have searched the web but cannot find anything that says you cannot do his - does anyone know of any rules or regulations that cover this installation. Thanks</p></blockquote><p></p>
[QUOTE="Saercoed, post: 411946, member: 18866"] We are in the process of refitting our bay and we have decided to construct a new "kitchen" unit In which we will have a sink hob combined unit on top (Smev 8862). Underneath we will have the waste water and clean water containers. Next to it ( still in the unit) will be the propane gas bottle ( with 50mm high lip and a 20mm dia dropout vent and a retaining strap) in a small box within. Above this and close to the underside of the worktop we intend to install a PMS 3h power management system with the panel fixed from the outside but wires accessible internally. This will be within 200mm of the underside of the hob unit of the sink/ hob combo. We have searched the web but cannot find anything that says you cannot do his - does anyone know of any rules or regulations that cover this installation. Thanks [/QUOTE]
Verification
Post reply
EarlyBay Forums
Technical
Gas bottle, sink, gas hob and electric switchgear in Cabinet
Top