Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
EarlyBay Forums
Technical
indicator tell tale issues
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Early Bay Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Max Power" data-source="post: 426294" data-attributes="member: 14078"><p>Since my mot where I had to put on indicators,full beam and stop lamps the idicator tell tale now glows with the engine/ign on,when you indicate they glow/flash brighter.I had a look today and saw the earth from the relay had come off as the connector had broken.I soldered on a new connector,cleaned the earth tab and refitted,still the same.I then took off the switch to check it,it looks ok but the fault is the same with the switch off the van.</p><p>If the relay is pulled out the lights go out</p><p>Next I checked the relay,from connector KBL (turn tell tale) I had 3 volts.When I closed the contacts in the relay it dropped to zero and the light went bright.</p><p>So I think the tell tale light are pos supplied and earthed to flash on?</p><p>Has anyone had a similar fault before I go out and buy a relay to try.</p></blockquote><p></p>
[QUOTE="Max Power, post: 426294, member: 14078"] Since my mot where I had to put on indicators,full beam and stop lamps the idicator tell tale now glows with the engine/ign on,when you indicate they glow/flash brighter.I had a look today and saw the earth from the relay had come off as the connector had broken.I soldered on a new connector,cleaned the earth tab and refitted,still the same.I then took off the switch to check it,it looks ok but the fault is the same with the switch off the van. If the relay is pulled out the lights go out Next I checked the relay,from connector KBL (turn tell tale) I had 3 volts.When I closed the contacts in the relay it dropped to zero and the light went bright. So I think the tell tale light are pos supplied and earthed to flash on? Has anyone had a similar fault before I go out and buy a relay to try. [/QUOTE]
Verification
Post reply
EarlyBay Forums
Technical
indicator tell tale issues
Top