nuts and bolts

[BuzBay]

Hi,

Just in the process of restoring my 1970 camper and needed some high tensile bolts for the front shocks, had to recommend this company, really old school labelling and cheap as chips! considering I was looking at £6-15 each just for the bolt from some places, this was £10 for 4x M12 100mm HT bolts, 8x washers & 4x nylon nuts

http://www.margnor-online.co.uk/

 

[Graham L]

Yep I use Margnor for exactly the same reason, technically the front damper bolts are M12 1.5 Fine threaded but those will do fine, bottom should only need nuts not bolts so just check the thread.

 

[BuzBay]

technically the front damper bolts are M12 1.5 Fine threaded but those will do fine, bottom should only need nuts not bolts so just check the thread.

Just out of interest why would you pay 2 as much for a tighter thred, is it a safety thing or just original type?