Help Support Early Bay Forum:
-
-
Some news from Grandpa. I made a new repairpanel with my Bead Roller and weld it in. After that I fit the repairpanel for the bulge... -
Not posted on here before but thought I’d introduce myself, this is my 69 bus I bought a couple of years ago as a bit of an ongoing...
-
matty74 reacted to Bertiethebus72's post in the thread Wheel Arches are flat on my 1972 Crossover? with
Like.
When I bought my crossover I had one flat arch and one rounded, and didn't notice for about a month!!. The crossover arches are a one... -
matty74 reacted to hotrodthug's post in the thread Hi from Harry the '71 Microbus Deluxe! with Like.
Hello all, it's been three years since I bought Harry so I suppose it's time I said hi! I'm Jamie and I have myself a '71 Microbus...
-
matty74 reacted to [email protected]'s post in the thread 1970 San Francisco westfalia resto with Like.
December 2007: on U.K. roads, freshly imported from San Fransisco with an asthmatic smog 1600, stock suspension, a slipping clutch...
-
matty74 reacted to [email protected]'s post in the thread 1970 San Francisco westfalia resto with Like.
Steve took us this cool bar where you can order a yard of beer. The rules are you give a shoe and only get it back if you finish it...
-
The rear upper shock absorber mount Was totally damaged. I find out this problem isn't rare as i thought. Here some pics how i solved...
-
Well it's taken me a few days inbetween work but she's all done and dusted for now ha. Crack welded up and painted, new window trim...
-
matty74 replied to the thread 1970 San Francisco westfalia resto.Great pics 👍
-
matty74 reacted to [email protected]'s post in the thread 1970 San Francisco westfalia resto with Like.
So Thursday loaded the bus up with some essentials and picked the missus up from work at 6pm…. After a rather wet and miserable blast...
-
Hi! Thanks. Yes. Either hang off the gutter or the top of the sliding door itself. Again - this isn’t my design, I’d seen similar online...
-
Can’t wait for a bit of warmer weather so I can finish of the heater install! And get back driving the bus 😁 So until then to keep me...
-
Progress is slow.... "Spot" primed the cargo floor and engine tray. Found the box with the door rubbers in, so fitted the o/s door...
-
Drill the spot welds out and remove the entire thing. If you ever go back stock just spot weld it back in
-
Its a standard 1600 single port, I did consider going 1641 but opted for standard spec in the end - ever since I have owned it there has...
-
-
Loading…
-
Loading…