Search results

You need to take off the rear cover plate, which covers the rear sliding mechanism, slide it so far along to where it is grooved, the door will now come off at the rear, place it on an axle stand or something similar, it is easy from there.Mike

Hi was wondering what the rear load floor above the engine bay was like, plus the grill type of thing which is mounted above the engine. Would need a piece of the load floor about 2 feet square or thereabouts and would have to be posted. Many thanks

Hi look on you tube plenty of videos of fitting lights and how to use beetle headlights on a camper.

Totally agree with you, I soon will need petrol tank breather pipes the rubber ones, where to get good quality ones from I just don't know. this is not a job which is easily done again if they fail. I would also be willing to pay extra for ones that should last my lifetime, senior citizen of a...

If you were closer would offer to weld it for you, have you a nice friend with a mig who will do it for you.

Many thanks ozziedog for your quick reply, I suppose I will already have this piece in place, anyway of checking. Thanks

Hi in the plans for bits to make yourself in many peoples posts, I hope I am not being rude or idiotic in asking what is the hoover pdf used for Thanks

Hi many thanks for quick reply thought I was doing something wrong or missing something.[probably a brain]

Hi wondering if anyone can help. Was looking at the rocket bus in gallery, got the first photo but then could only get photo not found within a window and click for photo, left click, right click nothing. Not very good with computers. Thanks Mike.

Do you happen to have checked the bulb

If you have drum brakes it could be a sticking cylinder, or with discs could be a sticking caliper. It could also be a flexi hose which is either blocked or beginning to collapse internally.

Would try by checking all the earths first'

Hi was wondering if any one has used Herbie Hospital in Leeds. Would probably want major bodywork and some mechanical work, are they good, bad or indifferent and are they reasonably priced. Thanks.

Hi has anybody tried the coupling lock yet, going to measure up in the next few days to see if it may fit, looks quite a substantial thing hope it works.

Hi has anybody tried the coupling lock yet, going to measure up in the next few days to see if it may fit, looks quite a substantial thing hope it works.

What about using an exhaust bandage as a temporary fix to get you home.

Great glad you have managed to sort it Mike.

Hi Iv'e got one of those heater blowers I think there from a 411 or 412. It works o.k. but have not got any pipes or I presume a 'y' piece to join it to the heat exchanger. If anyone has any idea where I can get these from I would be most grateful. The air outlets from the fan are different...

Hi here are the measurements I have been able to obtain. The whole plug is 12mm in length including the top flange, the flange itself is 20mm across, the plug part which goes inside the steering box has an outer diameter of 15mm, and inner diameter of 12mm. Hope this is of some help, Mike.

Hi just been out in the garage measured early and late filler caps exactly the same.