Indicator stalk wiring (8 wires)

[fluke22]

So, I bought a repro indicator stalk from A very nice bloke called Chad on here.

Has anyone got a wiring diagram for the repro's as the wires are different colours to the originals.

Thanks in advance,
Luke

 

[Peter Good]

Usually the Black cable on the repro replaces the Black/Green/White original.
Sorry no diagram with me at the moment.
Peter Good

 

[oxy-jon]

Ind switch Origonal switch
Black to black/white/green
White to black/ white
Blue to brown/white
Red to red/black
Yellow to yellow /black
Grey/dust to greyish/ black
Green to green/black
Tangerine to brown


Hope this helps..

Kindest regards

Jon

 

[fluke22]

Ok, I'm nearly there. One wire has come loose and im not sure where it goes.

It is the purple and black wire on the original and the grey and black on the new repro switch. Can anyone tell me where it needs to go. A quick reply would really help as I'm under the dash in a nest of wires as we speak :shock:

 

[fluke22]

It is the grey/black wire at the very top left of the circuit board which appear to be bridged by a small black wire to the bottom left. Any ideas peeps?