Porsche pattern rear drums / rotors for your bay

[mattp]

For any of you who are thinking of going with Porsche wheels on your bay I have this for £200, it includes new drums and will save you the expense of adaptors which are around £100 in themselves and widen your track (http://www.vwheritage.com/vw_spares_Wheel-adapt-5-112-VW-5-130-Porsche-PAIRS-25mm-AC601207_act_shop.product_pID_164402_lang_EN_country_GB.htm" onclick="window.open(this.href);return false

Please note this is for crossover bays already running 5*112 rear hubs as this is a straight swap over




Also note that the hubs have also been re-drilled for the 2 small fixing screws so if you ever need to replace the drums you can buy a pair off the shelf, slot out the holes and they fit straight on as OE. I have paid to have this done by a local machine shop and they have also pressed in new wheel studs, I am just looking to recover the costs of the drums and machining as now fitting rear disks

£200


Collect from S.London (Kingston) or Shropshire (Telford)

Matt 07715 623 564

 

[dubdubz]

Hi Matt, I'd.be interested in these, but would want to see pics, will the centre cap fit? Ibknow TPH used to shorten them...

Cheers

Darren

 

[daz66]

Hi
I would be intrested as well if Darren do`s not buy them

Daz

 

[mattp]

and up she goes

 

[mattp]

Far cheaper than a CE set up

 

[Jamez99]

yes you are right

 

[mattp]

yes you are right

Yep, your quite right, the are £350

http://www.creative-engineering.com/index.php?option=com_virtuemart&page=shop.browse&category_id=60&Itemid=26" onclick="window.open(this.href);return false;

 

[Nugsy]

to fit the Porsche centre caps you'll need to take about 10mm off your stub axles, so maybe get a pair up front and do it then, save having to take it all apart again at a later date