Wanted TP Manifold

[tsunamivw]

Hi all
Serious carb icing problem and need a tp manifold ASAP I'm in Lancashire

Cheers

Sean

 

[Gütterßnipe]

Hi, are you sure it's your manifold that needs replacing, a few things could cause this..

Spence

 

[tsunamivw]

Hi Spence

I'm a mechanical moron but the guy who is fixing it for me is convinced it's carb icing, it was running ok until the weather turned. It starts and runs nicely but once it's warmed up it cuts out as soon as you lift off the accelerator, restarts fine but won't tick over

The fan housing tubes have been blocked and the manifold has no heat risers so were reckoning put everything the way it should be and it should sort it.

The carb is getting white on the outside

Cheers

Sean

 

[mattp]

There are different manifolds so it would help if you knew what outputs you needed (vac or servo take off -or none?)

 

[tsunamivw]

Hi Matt

Apparently either 'as the vac outlets can be blanked and I don't have a vac advance dizzy so one without will do'

I have almost no idea what any of that meant

Cheers

 

[Clem]

I have some ends if you get a centre section only.

 

[tsunamivw]

Cheers Clem but i think its just the centre i need

 

[Clem]

Can't you clean it out? Caustic soda dip or unfolded wire coat hanger on a drill?

 

[Micko68]

PM'd you Sean.

Let me know.

 

[tsunamivw]

Cheers Micko PM'd

Hi Clem its the preheater tubes that I need that aren't on my manifold at all

Cheers

Sean