Search results

I would check compression first, then work your way back through electrics. If none of this seems to be at fault then adjust rockers and thenset carbs at base settings then you are ready to do timing, no point in doing timing till everything else is set as you will simply have to do it all again

If you are getting the long panels straight a 17" sander is invaluable mine cost me £40 and was money very well spent, if its already flat and just needs sanding down orbital will do

we mixed it up its Vauxhall white with 30g of blue per litre

Give me a bell this afternoon about 2 to reind me then 07792873544

Cheers mate

Im loving the sticker where did you get them

Try Kingfisher Kustoms or GSF, Ive got a load in stock I think

Did priming and basecoat with HVLP kit from B and Q top coat with compressor

That will be a Clarke hopper sytem then like a bu=ig tank with pipe out of the botton :)

Just done a camper for first time recently I bare metalled it due to amount of welding carried out, zinc primed then filled and sanded then etch primed. Used a basecoat as i got a miscolour from paintshop which was cheap and a couple of shades from colour I was going then a couple or three...

Been looking into the soda blasting and the difference is the valve on the bottom. Believe it or not Frost arent actually making much on this product at all, its £190 direct from Eastwoods and then you have shipping and tax etc. I have found the same blaster for free with 8 bags of grit...

New front panel bulge panels now made in steel simply cut out a square and either spot in or sikafix new panel which is joggled from inside. Has correct curvature to just slot in. Just made up some slot in indicator clamps as well, new design that clip in or can be welded in place. Pics to...

If you could supply ones to copy from Im sure he could do them, there is a company in US already doing them though dont know if you ahve seen them, advertised in last few VW Trends

Im just coordinating otherpeople are making these up for me Im too busy cutting up and welding the damn things hence I know what panels are needed out there

Ill have the inners and that rear inside NOS piece please

would you take 45 for the dizzy and rear covers please posted?

Out of interest what is different about this please?

Will do I have one at workshop but Im not happy with profile yet, cant check properly as only got a crossover and a late in at the minute

about £38 but got down to £25 each at vanfest i think

Cheers mate put me down as a defo on it please and i will check with my mate once pic is up You are a star as he buggered his when dropping his beam