Search results

Completely stock condition UK original right hand drive with only 1 owner before me,has been garaged since new and was serviced and maintained regardless of cost Comes with original stamped service and user handbook. 1972 crossover model,so has the benefit of front disc brakes,but retains the...

drive away retro canvas awning Vw motent comes with original carry bag and a separate bag with the poles and the brown groundsheet and pegs and guy ropes canvas good , sun faded as seen in the photos not used for 2 yrs but from memory 1 part of the mud flap was split away from the canvas and...

has anyone been to this or planning on going? I was wondering ,it starts at 10.00 can you still get into the main show/park area if you get there around 12.00 / 1.00 ?

2 bow roof rack for sale as new ,been stored inside ,it's the just kamper type , 2 bow with silver panted metal bars and wooden slats Probably has a couple of marks here and there but nothing I could really notice ,the 4 clamps could do with a couple of bits of foam rubber re gluing to protect...

Well the repair from last year is starting to give ! so I need another one its a black round stalk with a round tip 5 wires,although ive read a 7 wire one can be used the part numbers are 211 953 513J SWF-HLS69 SAE QB71 I have seen the repro ones but want to buy an original one really even...

anyone have one of these? I bought it as it didnt fit a early , it wont fit a crossover either It looks slightly different to the late ones ive seen too !

Anyone have any ideas on this strange timing problem It runs better when strobed at approximately 38deg full advance ,15 deg on idle It should be 30 or 32 Max and 7.5 deg idle If I set it to that it's rough on tick over and sluggish when pulling away esp at lower revs 1600TP with a unnamed...

Looking for a complete genuine solex 34 pic 3 please Doesn't have to be returned but a known good one would be good if possible if not anything considered but no aftermarket copies Thanks Matt

Type. SWF HLS69 It's the round stalk not paddle type with self cancelling lever and hi beam flash I will try to repair mine but would like to replace it I think Thanks Matt

Indicator stalk from my 1972 crossover fell off today We are going away in 8 days time so need to fix asap The white plastic insert looked like its cracked inside the switch allowing the arm to fall out Can you buy the plastic part or do you need the whole switch I've removed the housing but...

Hi looking for a OG flat 72 on type flat hubcap-no repros can meet up at volkworld on Sunday condition wise,dont mind a few small marks or some tiny dents dont really want a rusty one as mines already like that cheers Matt

To save me pulling the rear trims off,does anyone know if there is a lower bolt mount fitted just below the existing holes I've found The van has the rear holes either side that are just below the windows I've seen a picture with a bar bracket assembly and would need a lower bolt to fix it to...

Hi Has anyone in here have a standard Danbury interior and fitted 3 points rear belts? I've fitted some lap belts ,think they were securon ones last year.but they are a pain as they drop down into the cushions and you lose both ends ,they pull out and clip together OK but once they start to...

Been having a read online and on old threads on here I want to replace my 009 type and reconnect the vacuum that's been blocked off Are the correct Bosch vacuum type distributors still available new?I don't know the Bosch number I'm afraid The engine is a believe a 1600TP Or are the...

Looking to replace a 009 with an original Bosch vacuum type one If anyone has one that's OK let me know Or a good electronic one by chance? Thanks

Now the bus is tucked away in the carport,I've decided to have a go at fixing it It has only showed up twice so will be tough to track down It clicks the solenoid and won't spin over ,tried a jump battery still the same ,both times when it was hot Before I could get under to give it a whack and...

Set of 4 commercial 8 ply van tyres Plenty of tread left ,slightly more wear in the inner edge I haven't a tyre tread gauge but I would guess 6 or 7 mm Removed today 2 are Uniroyal's, 1 continental and the last one is miro or something similar They are fairly old but dont have any bad...

The wheels are off being powder coated then new tyres The original caps are OK ish a bit surface rusted ,I'm going to have a go with autosol but was wondering if any aftermarket new ones are any good ? Or should I get mine rechromed? Thanks Matt

I want to get my wheels blasted and powder coated but need a couple of loan wheels Doesn't matter if the tyres are bald or even flat The vans in a car port and no access to one side so can't axle stand it all round Will collect and probably need them for 2\4 weeks Its a cross over so has 4 bolt...

In the process of ordering a few parts after scanning the various threads on here Only 1 thing I've not checked is how do you mount the battery ? Thers s no clamp and no one has mentioned how they did it I guess it would need a bit of ply to protect the panel underneath too Thanks Matt