front end leaning to one side

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rhjackson

Well-known member
Joined
Apr 22, 2007
Messages
73
Reaction score
0
What are the most likely causes for a bus to lean to one side at the front? There is probably about 3-4 inch difference (There are no shocks attatched to the front end)

The PO has dropped the front end but I don't know if its got adjusters or dropped spindles.

thx
 
The torsion leaves usually take a bit of a sag on the drivers side due there always being a driver in it. However 3-4 inches sounds a bit much, maybe the leaves have snapped?
 
Have a look on the beam the grub screw on an adjuster if fitted may be gone and its moved under the weight....plus get some shocks on there.....
 

Latest posts

Top