Hi no longer have an air cooled dub anymore so selling off a few spare parts. For collection only... hopefully from Volksworld show on the Saturday! or from near J17 M4 or Bristol.
Rear engine tin
Has had some repairs...not by me! Edge a bit tatty as in second pic but is covered by foam engine seal anyway.
£40
Solex 34 pict 3 and Bocar carb
Solex carb has had new bushings fitted to the throttle spindle, was planning on stripping the jets from the bocar carb as had it running on a 1641cc engine...ended up getting twin carbs!! Should be everything there to make up a good carb, including new gaskets.
£60 ovno for the whole lot!
Oil Bath Air filter
Was working when removed flap moved when engine revved. has sealant on outer aspect of the pipes to the carb.
£25 ono SOLD
Inlet manifold
£15 ono
air filter base
Bit battered but may still be useable to refitt?
£5
Early bay calipers
One of the bodies is cracked, other I'm sure would need a rebuild, oldish pic are somewhere at the bottom of my shed. Maybe could be used for exchange units / parts?
£40ono
Late bay calipers
Attempted a rebuild...so have newish seals. Were still sticking when refitted so obviously didn't do a good enough job, and would need doing again!
£15
Rear engine tin
Has had some repairs...not by me! Edge a bit tatty as in second pic but is covered by foam engine seal anyway.
£40
Solex 34 pict 3 and Bocar carb
Solex carb has had new bushings fitted to the throttle spindle, was planning on stripping the jets from the bocar carb as had it running on a 1641cc engine...ended up getting twin carbs!! Should be everything there to make up a good carb, including new gaskets.
£60 ovno for the whole lot!
Oil Bath Air filter
Was working when removed flap moved when engine revved. has sealant on outer aspect of the pipes to the carb.
£25 ono SOLD
Inlet manifold
£15 ono
air filter base
Bit battered but may still be useable to refitt?
£5
Early bay calipers
One of the bodies is cracked, other I'm sure would need a rebuild, oldish pic are somewhere at the bottom of my shed. Maybe could be used for exchange units / parts?
£40ono
Late bay calipers
Attempted a rebuild...so have newish seals. Were still sticking when refitted so obviously didn't do a good enough job, and would need doing again!
£15
