piece of **** (71 westy)

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Cant believe how good it looks with that bit of red mate

5 weeks to get the other side done ready for the line up at my wedding ;)
 
cheers Boyo's, gonna get on it with a piece of wood and hammers. Stu I wanted to get it done for SkegVagas on Sunday, but don't think I'll be all the way round be then :p but will has it done for your wedding :D
 
Dude a friend of yours needs to buy this and do the same og paint speed stripe but inverted colors! Oh and slam his too...

http://www.thesamba.com/vw/classifieds/detail.php?id=1489557" onclick="window.open(this.href);return false;
 
null_zpsdc2151a7.jpg
 
Nice job with the rear corner dude.
I really should do mine as its nearly all filler

Did you have to sand a lot back? I can't tell from the pics?
I'm thinking I may need to get a wire wheel on mine.:/
 
i wanted to keep as much og paint as possible, I looked in the engine bay and knocked the 2inch deep dint out with a lump hammer, then any filler left i tore fine sand paper into inch squares and sanded it till it was really thin, then brillo pads soaked in paint thinners. It was horrible :lol:
 
68_early_bay said:
dubscum said:


Looking good ash 8) what are you doing where you've gone to bare metal on the corner, a coat a lacquer to protect it??

:mrgreen:

i had bought this stripe from a stall at vivaskegvegas for top the stripe off

was gonna lacquar it (had a chat with groundhugger Dave on sunday about it) But I'm thinking now if I'm gonna lacquar it i might take it all back to red

 
I think a trip to Ash's house with boxes full of wet & dry and plenty of beer is in order :msn4:

OG paint look proper sick mate!
 
dubscum said:
68_early_bay said:
dubscum said:


Looking good ash 8) what are you doing where you've gone to bare metal on the corner, a coat a lacquer to protect it??

:mrgreen:

i had bought this stripe from a stall at vivaskegvegas for top the stripe off

was gonna lacquar it (had a chat with groundhugger Dave on sunday about it) But I'm thinking now if I'm gonna lacquar it i might take it all back to red


Looking tops! Re lacquer, have a mooch at the thread by Audix - he used some boat lacquer, was expensive, but looks really good!

http://forum.earlybay.com/viewtopic.php?t=43559" onclick="window.open(this.href);return false;

Cheers!

Alistair
 
null_zps90a98c09.jpg

Thanks you peeps :)
After a lot of thinking I decided to raise my bus to the highest setting. Where me and arch go to
The Bmx track there's staggered speed bumps and it beaches my bus front and back
null_zpsdc333e6c.jpg

For the record I hate it this high and would rather not own it at this hight (it's low again now) but even worse on a test run it tried to kill us after a 3 point turn. More steering lock not aways a good thing
http://youtu.be/uwva50o6a3s" onclick="window.open(this.href);return false;
There's ya problem
null_zps17f0f02b.jpg

Up and down
null_zpsd08259de.jpg

Made new lines
null_zps5d9d3f6a.jpg

Got me weld on
null_zpse30972b3.jpg

Welds look **** but are very strong this time
null_zps83c11d35.jpg

Just need to bleed the backs and lower the back down
 
bled the brakes and fettled the suspension and its smooth as :D nipped to halfords to buy a horn and they provided me a gazebo to park under

let my mate drive it ...... :shock:
http://www.youtube.com/watch?v=ZhtB4ULWlQw" onclick="window.open(this.href);return false;
I know it might not seem like it but it's the build i love. Ive been to Ninove with the boys and toured Cornwall with my family. I've taken this bus as far as I can and want to build another one, other then the shell its all new or rebuilt: for sale
 

Latest posts

Top