stalling!

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blakefruid

New member
Joined
Jan 13, 2010
Messages
3
Reaction score
0
Evening All,
I'm having a little trouble with my van stalling at junctions even when warm. Its a 1800 type 4 bay. its had new plugs, leads, coil, pertronix (just died on the way home- no spark), checked the valves and adjusted and set timing- so starts fine, runs well, but dies at junctions and at times has died at tickover. So i'm thbinking its either fuel starvation or a vac leak, any ideas on what to check would be most helpful.
cheers,
Blakie
 
What carburation do you have? Had similer stalling at junctions with a single twin choke progressive but with no heat to either the inlet pipes or the carb air intake. It would idle smoothly once the pipes where wet with fuel, but after normal speed use they seem to dry out and then stall when decel to idle.
 
Top