Search results

He is the link sorry. http://www.advancedfluidsolutions.co.uk/55mm-id-732-100-bio-fuel-hose-diesel--petrol-2015-p.asp" onclick="window.open(this.href);return false;

Had the same problem with the R9 pipe started to crack after a couple of years. I have just fitted the Bio Fuel pipe it is nice and soft easy to fit, it is a bit more expensive but then so is your van.

The wheels are on a 1971 earlybay, they were not expensive but i thought they would last at least a year.

I have tried stainless but they all sprung off, it took me a year to lose them all.

No Geordie, all 4 hubcaps have gone like it in 5 months.

Where do you get good hubcaps, i have had these since September 2013 bought new at the Busfest.

Mine is as in the photo, i have the heater under the back seat with the outlet pointing towards the windscreen it defrosts the screen fine.

I have a gallon Diesel tank strapped in opposite the battery tray. Heater works fine on the move, have the heater ticking over when driving keeps the van toasty.

I have a 123 dizzy with the same problem. When ticking over with a timing light on the marks the strobe jumps about and the van runs lumpy when driven. I swapped the dizzy over to a std vac dizzy with electronic points and it runs spot on. The 123 dizzy is around 4 years old. I got it from...

I have one you can borrow, where abouts are you.

Sparkywig is right about the carbs, to many small bit sticking out very easy to knock off. I also use a small jack under the gearbox, i find it easer to line it all up..

Its just the tub, all the rest of the bodywork is fibreglass.

You are right, its an original 1968 model left hand drive as well.

Very nice, we have just had this car turn up for repair, can you guess what it is ?

Had the same van for 24 years done 10s of thousands of miles and only had a starter motor fail, just a quick bump start got home ok. New starter motor next day delivery fitted no problems back to normal, LOVELY :D....

Hi Dave, i take it from the photos that its in the recesses where the roof vents fit. If it was mine i would grind off the loose gelcoat then sand it reasonably smooth and paint it with gelcoat with a wax additive, this will make it water proof. If you need to know anymore pm me, Where abouts...

Hi M, had it fitted for about 2 months now with no problems so far. A friend who works in marine stainless was impressed with the build quality, hope this helps.

I have got one, its very well built and fits well not to loud either :D

I have just fit a Vintage Speed exhaust, good build quality and a good fit,

Got mine when i was 33, that was in 1987 and we still have her :D :D