Search results

Hello I have a front pair of T2D 'slam' shocks for sale if you are interested. They are about 3000 miles old. They were not stuff enough for my bus so went for adjustables. Let me know if of any interest.

When i made the changeover the slackness was due to a **** top pulley. I have since changed it for a billet jobby and is now much better with the proper sized belt Just a thought :msn4:

this sounds more like it :lol: my van must be one of the lightest around as it has nothing in it apart from a bed, if the 60% of gross applies i am well within the weight limit. wierdly enough the tyres i took off where of a higher rating but drove like **** compared to the new jobbies.

WHS ^ they worked for me

after a bit of research i had some new tyres fitted yesterday but I now think i have cocked up as the load ratings are as follows: 81 front - 462kg 84 rear - 500kg the van is a westy but the previous owner stripped the interior out so now only has a full width bed :evil: we are off to...

For all you electrical wizards please can you help me as I am not very clued up with electrics :roll: After an MOT and a fiddle by someone else my wipers have ceased to work. I can confirm the washer switch has power to it (terminal 30) and after continuity testing when switched terminals 53...

Cheers for your help, that's great. I will now check connections but based on your info I bet it is a cheap **** item from china!

Cheers for your help but do you know which numbers refer to which terminals on the switch? There are no numbers on the rear of my switch, very strange as its original!

Anyone got a wiper switch kicking around that they want to sell?

Thanks for the response but I already have wiring diagrams etc. What I need is an image of the back of the switch so I know which cable goes where.

Has anyone got any images or diagrams on what wire goes where on the back of the switch? Mine has stopped working after someone tinkered with it! Need to check the connections as the fuse isn't blown and have power to it. Any help would be appreciated :D

Good news, do you have an image or link of what you bought?

1. Toffo24 2. Terrier man 3. Chad 4. Hadders (Mark) 5. Marriedblonde 6. Whistler 7. A5H 8. Shorty 9. Humby 10. Dasteel 11. Skiingnick 12. johnnycake 13. vwwinston72 14. Mr G 15. Lobie 16. 68_early_bay 17. Myvanway 18. cotswoldiver 19. Earlybay Bill 20. Luk0zade 21. Curly Head

i dont know if it is my computer but i cant see any photos from that link. whereabouts are you?

I spoke to someone who runs a car audio shop today and said that in a van he would be amazed if it worked, especially if mounted under the dash top. My other issue is that I have a heated screen so it can't be located anywhere near there, however I do have a sunroof so I will look at the...

Don't want to piss on your parade but the first 100mm of the extinguishing tube should be straight :msn4: I have just had to have mine fixed and re-installed because of this :oops:

Can anyone recommend a hidden antenna for a radio or if they are any good?

Just reading Hayburner magazine and there is an advert offering that service. It says to email [email protected] for a quote.

I have adjusters on my beam with spax adjustable shocks from creative. It rides ok but if I had my time again I would leave the beam as standard and run drop spindles, I understand this is a much more comfortable ride. I have adjustable spring plates on the rear, which work a treat. Whatever...

In a week or two I will have a repro item available, if you pay postage you can have it