Search results

Hi, I have a 72 bay. I've changed my steering coupling for a vw genuine one, but found it is slightly conductive. It's not enough to bring the horn on, but once you press the horn, it won't turn off. I have read others have had this problem. So, if the vw genuine is no good, what do other...

Hi, I'm after the insulating part that goes on the steering column around where the ignition lock goes through it. It's for a 73 bay. Mine seems to be missing, which I guess why my horn doesn't work right. I can't seem to find anyone who sells it, so please let me know if you have one. Thanks...

Hi, I'm rekeying an ignition barrel to fit my key. All has gone well and I'm at the stage of swaping the tumblers around to fit my key. This has gone fairly well, but luck is not on my side though as I will need two tumblers to make all of them work. Does anyone have a selection of tumblers I...

32/36 progressive Weber carb: Genuine Weber carb. I have ultrasonically cleaned it and rebuilt it with a service kit. Comes with manifold, which I have cleaned, manifold support bracket, new exhaust riser tubes, new air filter and new linkage adaptor - £150 (Northampton collection) or £160...

I'm on the look out for a fridge where you don't need to put two huge vent holes in the side of the van. I think the electrolux RM 123 is such a fridge, where it draws air from underneath and vents it out the top back into the van. If anyone one has such a fridge for sale please let me know...

Porsche boxster 986 seats for sale. They are a bit worn , but presentable enough to fit straight in. £200 for both. I can take to Standford Hall, or collect from Northampton

Help! I've taken my carb apart and cleaned everything in an ultrasonic bath. I rebuilt it using a kit from GSF. Trouble is the bypass and volume screws don't now seem to do anything, no matter where I turn them too. It running very rich. I've tried setting it up as per the vw resource web page...

I bought some Porsche seats and finally got round to fitting them. I've come across a few problems which I would be grateful if anyone could help me with: 1. With one runner centred near the edge where you walk through, the other runner near the door is all the way over. If I drilled through...

Hi, I'm going through dynamo brushes like they are going out if fashion!! I changed them 500 miles ago and now they are worn to nothing. The comm looks smooth so I don't think it chewing them up. Does anyone know if the amount of current drawn affects the wear rate? I have a leisure battery...

All, It looks like the previous owner of my camper saw fit to cut out a section of the shroud that surounds the key lock (see below). It's a cross over bay, so this shroud has two channels for wiring, one on each side. This is as the wipers are on the sterring column as weel as the indicators...

Hi, I'm investigating why when on full lock the horn sometimes comes on. I suspecting that my wiring an column isn't quite right. Below are some photos I have taken. The first problem that I can see is that the bottom cover plate of the column isn't attached to the floor pan correctly. It's...

For sale is a very straight, freshly painted rear bumper. I bought it as it was advertised as a cross over bumper. However, when I came to offer it up, it's clearly not wide enough. Therefore I can only assume it's for an early bay, or maybe a splitty?? It owes me £200 (original purchase price...

I have a dormobile roof which is heavey to lift when putting it up. The spring arms don't seem to offer any assistance when putting it up. I have heard that the spring arms can be fitted the wrong way round. Could you please take a llok at the pictures of mine and advice wether they are...

I have for sale 2 used heat exchangers (left and right hand). I fitted new ones when I fitted a new exhaust just so I had piece of mind the whole exhuast system wouldn't need to touching for a few years. As far as I am aware they do not leak. I'd like £25 for the pair. I'm based in...

I have for sale a brand new EMPI single quiet pack silencer. It has never been used. I couldn't get the header to fit my engine without fouling the engine support bar. I ended up scrapping the header after my attempts at reforming it went a bit wrong! I'd like £40 for it. I'm based in...

Hi, I'm running dropped spindles. In order to prevent wheel arch rubbing I'm running 15" wheels with 175/55 tyres. As these are smaller than standard the speedo now is incorrect. I thought this would just be a bit off, but as I way driving today at an indicated 60 mph, I looked at my sat nav...

2 Yoko A-Drive 185 65 R15 Tyres bought in error when I lowered my van using dropped spindles. I thought I needed 185 65 r15's all round, but it turns out I needed 175 65 R15's on the front. Therefore I removed these after about 250 miles. I'm after £50 for the pair. Thanks

4 hubs caps that came off my van that I recently put alloy wheels on. I'd like £20 for the lot.

6 steel wheels off my camper van. I recently put alloy wheels on, so I'm selling the steel ones. I got two extra ones when I bought the van, so thus I have 6 to sell. I'd like £60 for the lot. Thanks

Hello all, I recently bought a single quite pack off vw heritage and new heat exchangers. I fitted the heat exchangers then offered up the header. I was some what surprised when it didn't line up! The two top pipes that mate to the cylinder heads are aligned correctly, but the two pipes that...