Search results

From my us import deluxe. Black with the support bars, bulkhead vents and the airport vents (not pictured but will be included) They're in ok condition but will need a couple of repairs. If you're handy with fiberglass they'll be spot on with little effort. More pics available if needed. They...

First one (left) comes with flaps. Would benefit from a lick of paint. £25 + post or collect in Leeds Second (right) has a weird angled air outlet. Would make a good donor for blanking off or modifying. Came from a bus with air con so maybe something to do with that. £10 + post or collect in...

Came from my 71. Not needed as I've decided to blank off and fit an auxiliary later on in life! £10 + £5 post or collect in Leeds. Sent from my PLK-L01 using Tapatalk

Hi all, Just had the van running outside for half an hour, engine nice and warmed up but getting absolutely no heating in the cab. It's not something I've thought about before, I thought I'd got everything sorted but only ever had it on the road in summer so never noticed any issues! I don't...

Hi all after a 340mm rod. The linkage I bought has been modified to use Empi manifolds so the rods are too short. the kit comes with 2 x 340mm and 1 x 360mm, I think its usually one of each that gets used. If you have a spare, please sell me it, No ones got them in stock. Can collect near...

Morning all, Currently on with some engine work, the only thing that lets it down is the battered stock exhaust so I'm looking for something that I can fit and forget. Doesn't need to be super performance. A GSF or Bluebird stainless job would be good! Collection near leeds or posted if it's...

Hi all - Finally getting round to fitting my Weber ICT carbs in the next couple of days - just making sure I've got all the correct bits but one thing I'm unsure on (even more unsure after reading so much divided opinion) is the balance pipe between the carbs. I've got CB manifolds with 1/8...

Afternoon all - Just pulled the engine from the van to replace alternator and fit twin 34ICT carbs - the exhaust is a sorry looking standard system so I was looking at potential replacements. I know the Vintage Speed is widely regarded as a winner - though it's a bit more than I want to spend...

Afternoon all, Currently got my carb off to repair the bushes - on stripping down they don't seem to be plastic, unless they're plastic with a thin metal sleeve? Has anyone removed metal bushes from the carb before to replace them? I've got some replacement bushes waiting - There is a load of...

Looking for an alternator, ideally internal regulator to replace my knackered one. Close to Leeds for collection or posted if possible.

Microbus rear mat from my 71 US import. It's in need of a real good deep clean. Some minor tears from years of service but it's still pretty good. £30 collected - happy to wrap/box and for you to arrange courier - it's a heavy thing though!

Evening all. The time has come... I can't hack my van being on stilts any more. Budget has been the issue all along so have stayed stock height but now feel like I can probably free up enough brass to sort it and I'm now looking for some good used parts if possible. Would consider -...

Hi all - The sump studs on my engine have seen better days - I bought it as a recon and it's running great but when it came round to oil change time, the studs all came out with the nuts, most of them had coils of metal on them like they had been threaded - confirmed as I put it all back...

Mine's on it's way out - it's starting falling to bits and now when I indicate left I just get a blast of the horn - had to plan my route around only turning right now!

Hi all I've got a couple of sliding windows from a Riviera that I'm.trying to figure out how to fit. If you've got one then give me a shout- I may need help! Thanks

Apologies if this has been done to death, I've read about 8 million lowering articles and looked at every available option but I'm just confusing myself. Mine's a 71 bay so do I need specific dropped spindles for my calipers? and the spring plates seem to cross over the 71 period so not sure...

Hi all - My engine has a lovely PO bodge where one of the sump studs is missing so it has a little bolt instead - the thread seems to be mullered which is why the stud has been removed. Has anyone drilled and fitted an oversized stud with the engine in situ? It's running fine and the oil leak...

Hi all, Looking to replace the rear side windows in my bus with solid glass and maybe a westy louvered window or something similar. I've currently got deluxe opening windows and rather than mess about replacing the seals I think I'd rather switch out for solid and then sell mine on. Anyone...

Hi all After recently re fitting the engine I came to attach the heat exchangers to the pipes, it was then that I realised I was missing something. This is what came off one of them, it's now stored in a bag and I imagine it's likely to be asbestos so wonder what has been made to replace these...

Hi all, Need a piece of cargo floor, got a rotten middle seat mount that I'm going to remove and hopefully replace with a regular ridged section. If anyone has one that would be great. I know schofields sell them for about £30 but was hoping to just get the piece I need for a bit less!