1972 devon crossover for spares. updated pics today........

[rusty]

due in soon 1974 dormobile.

http://www.nosvw.co.uk" onclick="window.open(this.href);return false;

 

[rusty]

bump for the 72 :mrgreen:

http://www.nosvw.co.uk" onclick="window.open(this.href);return false;

 

[rusty]

loads left wot do you need....


http://www.nosvw.co.uk" onclick="window.open(this.href);return false;

 

[sparkywig]

Is there any of the table fixing strip fitted Simon?
I need the long bit that supports the table, and the shorter piece mounted on the seat bulkhead that secures the lid of the cooker unit.
Ta.

 

[rusty]

sorry for not getting back to you sooner, all the interior parts are sold , if any fixings come in , i will pm you mate.

 

[sparkywig]

OK, cheers Simon.

 

[K@rlos]

Are the wiper arms good? If so I'll have em.

Karlos

 

[rusty]

pms sent :mrgreen:

http://www.nosvw.co.uk" onclick="window.open(this.href);return false;

 

[rusty]

http://www.nosvw.co.uk" onclick="window.open(this.href);return false;

 

[rusty]

top up :mrgreen:

 

[rusty]

good front brake calipers (1971-72 only)

http://www.nosvw.co.uk" onclick="window.open(this.href);return false;

 

[rusty]

loads of body cuts left.

 

[62 deluxe]

I need the tube that curves up to the totem pole - have you got one in good condition?

 

[wakalino]

Hi Buddy, have you got a fuel tank for a 72?

 

[thejones's]

I need the outer steering column and upper shroud.

Ta.

 

[rusty]

pms sent.


http://www.nosvw.co.uk" onclick="window.open(this.href);return false;

 

[marcher]

due in soon 1974 dormobile.

http://www.nosvw.co.uk" onclick="window.open(this.href);return false;

Simon, Do you still have the Dormobile table from this van??
cheers

 

[kank]

Looking for a rear roof cut 8" into the gutters and the complete vents both sides etc plus a n/s front pillar again with a section of gutter

 

[Nugsy]

Do you have any 71-79 rear stub axles in yet, also interested in a rear floor/engine cover cut to repair my centre seat key holes with. Basically enough to replace all 4 with an inch or to round to help fix this:

thanks

 

[rusty]

updated.......

01258 841064