orr_niall
Active member
- Joined
- Nov 8, 2018
- Messages
- 31
- Reaction score
- 0
Hi, both my window scraper rubbers have gone, split, weathered and are now frequently allowing water in.
I am looking to replace but am struggling to see a ‘how to’ guide. Not much that focuses on this on YouTube which would be ideal to see if this is possible as a DIY job.
What I have read it involves knock on work to the seals and frame of the window and vertical support also with the frame connections high up and low down within the door skin.
Any advice on best parts and method would be great.
Sent from my iPhone using Tapatalk
I am looking to replace but am struggling to see a ‘how to’ guide. Not much that focuses on this on YouTube which would be ideal to see if this is possible as a DIY job.
What I have read it involves knock on work to the seals and frame of the window and vertical support also with the frame connections high up and low down within the door skin.
Any advice on best parts and method would be great.
Sent from my iPhone using Tapatalk