Carb Balancer

[Guest]

http://www.gunson.co.uk/item.aspx?item=1813&cat=668

would this be any good for balancing carbs?

http://www.gunson.co.uk/items/pdf/Products/G4053_Instructions.pdf

its a good bit cheaper than the round flow meter you normally see.

 

[Joval]

They're about as basic as it gets,
these are far better -

for ICTs

http://cgi.ebay.com/ebaymotors/Carburetor-Synchronizer-carb-sync-Gauge-XS650-CB-CL-350_W0QQcmdZViewItemQQhashZitem220218909229QQitemZ220218909229

for IDF, DRLA

http://cgi.ebay.com/Carburetor-Synchronizer-carb-sync-Gauge-CB550-CB650-EMG_W0QQitemZ220218909226QQcmdZViewItem?hash=item220218909226

 

[Guest]

They're about as basic as it gets,
these are far better -

for ICTs

http://cgi.ebay.com/ebaymotors/Carburetor-Synchronizer-carb-sync-Gauge-XS650-CB-CL-350_W0QQcmdZViewItemQQhashZitem220218909229QQitemZ220218909229

for IDF, DRLA

http://cgi.ebay.com/Carburetor-Synchronizer-carb-sync-Gauge-CB550-CB650-EMG_W0QQitemZ220218909226QQcmdZViewItem?hash=item220218909226

surely they are for bikes? :?

i dont understand how they work?

 

[Joval]

Connect to the vacuum port on the carb body.

 

[khh48]

I use this one, works nice

http://www.vwheritage.com/ssp/_rfx/?sku=AC000124&src=rfx&&rfx_page=70&RFX_PassBack=&rfx_catalogname=SSP_0708&rfx_catalog=1&&rfx_spread=70&rfx_gid=4653215&rfx_pageid=70&rfx_catalog=1&rfx_passback=&rfx_base=http%3a%2f%2fvwheritage.richfx.com.edgesuite.net%2fcatalog_vwheritage%2fSSP_0708%2f&rfx_catalog_base=http%3a%2f%2fwww.vwheritage.com%2fssp%2f_rfx%2fcatalogue.cfm%3f&rfx_omni=1&rfx_OmniPageName=p70-71&rfx_OmniCatalogName=spring2007&rfx_OmniClientID=vwheritage

 

[Joval]

I use this one, works nice

http://www.vwheritage.com/ssp/_rfx/?sku=AC000124&src=rfx&&rfx_page=70&RFX_PassBack=&rfx_catalogname=SSP_0708&rfx_catalog=1&&rfx_spread=70&rfx_gid=4653215&rfx_pageid=70&rfx_catalog=1&rfx_passback=&rfx_base=http%3a%2f%2fvwheritage.richfx.com.edgesuite.net%2fcatalog_vwheritage%2fSSP_0708%2f&rfx_catalog_base=http%3a%2f%2fwww.vwheritage.com%2fssp%2f_rfx%2fcatalogue.cfm%3f&rfx_omni=1&rfx_OmniPageName=p70-71&rfx_OmniCatalogName=spring2007&rfx_OmniClientID=vwheritage

Yup, have that one too, pretty good but too expensive.

The only thing with EMPI on the box I would recommend :lol:

http://cgi.ebay.com/ebaymotors/EMPI-UNIVERSAL-CARB-SYNC_W0QQcmdZViewItemQQhashZitem190198177083QQitemZ190198177083

 

[Guest]

Connect to the vacuum port on the carb body.

AH! i will be running 36 IDFs and a non vac dizzy, there is no vac on the carb body or manifolds either.

khh48, that seems to be the standard meter, but being the cheap-ass that i am, i was trying to save a few pounds on a diferrent version

 

[Joval]

Get the snail type