danielgomez
Active member
I have spotted something else I fancy so as long as that's for sale my bus is for sale.
I have had my my 69 Bay a few years now,it was imported from California Via Northern Ireland(hence the NI registration number could go onto an age related plate has never bothered me).
The previous owner had fitted :
New T2D 4" narrowed beam, Dropped spindles, arms,balljoints etc
New brakes, Bearings etc all round
New Adj Rear Springplates
Last winter the vehicle had some work carried out at DTH Performance Workshop & Deadline Paint & body,this included :
Air Shocks
Rear Battery Tray & corner repair
Repair to cargo floor and sliding door
Paint work to rear tailgate,engine lid,both rear corners and drivers rear panel.
This had some patina blended in to fit the overall look of the bus,with some pinstripe (Ross Hastie) thrown in for good measure.
I'm chuffed to bits with the work everyone involved carried out on the bus.
It rolls on 15 Inch steels(painted less than a year ago)with big logo hub caps.
NOS 1600 S/P, runs perfectly, no issues(To & from Ebi 5 & 6 with no issues).
During my ownership I have fitted a pair of Z Bed hinges(Allows you to use the rear seat as a bed when the centre row is removed)Got a good 2nd hand rear bench seat.
Fitted Ash wood panel set,Secondary Battery with smart charge relay ,Alpine head unit,amp,sub & 6x9s,New clutch & clutch fork,tailgate glass seal as the old one had seen better days,new cab floor matt,electric washer kit. Coverted it to an Alternator.Had the roof bumpers & Bozbar painted in Texas Brown.
Fitted a Buttys Bits throttle linkage.
The van is motd until March 2016(will need to double check).
Bozbar and full length roof rack fitted,these stay with the bus and it sells as I am not really interested in parting out the bus etc etc
The Logos on both cab doors would polish out if you wanted to remove them.
Few more photos to give you the idea.
Any questions more images etc etc you can pm me on here or email me on [email protected]
My asking price is £13,500
Thank you
Daniel.
[
I have had my my 69 Bay a few years now,it was imported from California Via Northern Ireland(hence the NI registration number could go onto an age related plate has never bothered me).
The previous owner had fitted :
New T2D 4" narrowed beam, Dropped spindles, arms,balljoints etc
New brakes, Bearings etc all round
New Adj Rear Springplates
Last winter the vehicle had some work carried out at DTH Performance Workshop & Deadline Paint & body,this included :
Air Shocks
Rear Battery Tray & corner repair
Repair to cargo floor and sliding door
Paint work to rear tailgate,engine lid,both rear corners and drivers rear panel.
This had some patina blended in to fit the overall look of the bus,with some pinstripe (Ross Hastie) thrown in for good measure.
I'm chuffed to bits with the work everyone involved carried out on the bus.
It rolls on 15 Inch steels(painted less than a year ago)with big logo hub caps.
NOS 1600 S/P, runs perfectly, no issues(To & from Ebi 5 & 6 with no issues).
During my ownership I have fitted a pair of Z Bed hinges(Allows you to use the rear seat as a bed when the centre row is removed)Got a good 2nd hand rear bench seat.
Fitted Ash wood panel set,Secondary Battery with smart charge relay ,Alpine head unit,amp,sub & 6x9s,New clutch & clutch fork,tailgate glass seal as the old one had seen better days,new cab floor matt,electric washer kit. Coverted it to an Alternator.Had the roof bumpers & Bozbar painted in Texas Brown.
Fitted a Buttys Bits throttle linkage.
The van is motd until March 2016(will need to double check).
Bozbar and full length roof rack fitted,these stay with the bus and it sells as I am not really interested in parting out the bus etc etc
The Logos on both cab doors would polish out if you wanted to remove them.
Few more photos to give you the idea.
Any questions more images etc etc you can pm me on here or email me on [email protected]
My asking price is £13,500
Thank you
Daniel.
[
