Orange
Member
I have an early bay complete ball joint beam for sale £200
It has a anti roll bar
I have taken this from my split, that has been sitting for 7 years, all 4 ball joints were replaced about 10-15K miles before the van was laid up.
The inner pillars have been repaired, and the beam was cut and turned by 3" by Just kampers when it had a workshop, still have the receipt.
All moving parts are tight, the only seals that are bad are one of the Tie rod ends and one on the steering damper.
Also One of the bump stops has rusted and bent loosing the bump stop. it has Split locking nuts on the spindles as the original allen keys were rounded off.
The brake shoes have plenty of material left although the inner face of the drums have suffered from rust from sitting for a while.
Can collect from SM3 or can arrange a pallet to courier in the UK at your cost.
It has a anti roll bar
I have taken this from my split, that has been sitting for 7 years, all 4 ball joints were replaced about 10-15K miles before the van was laid up.
The inner pillars have been repaired, and the beam was cut and turned by 3" by Just kampers when it had a workshop, still have the receipt.
All moving parts are tight, the only seals that are bad are one of the Tie rod ends and one on the steering damper.
Also One of the bump stops has rusted and bent loosing the bump stop. it has Split locking nuts on the spindles as the original allen keys were rounded off.
The brake shoes have plenty of material left although the inner face of the drums have suffered from rust from sitting for a while.
Can collect from SM3 or can arrange a pallet to courier in the UK at your cost.
